* Home Help Login Register

Welcome, Guest. Please login or register.
Did you miss your activation email?
Friday 22 November 2024, 09:22:12 am

Login with username, password and session length

Visit the Official Endian Reference Manual  HERE
14258 Posts in 4377 Topics by 6516 Members
Latest Member: DaveH
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  Hardware Support
| | |-+  EFW 2.3: Realtek LAN compiled drivers for RTL8111/8168B		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 [2] Go Down Print
Author Topic: EFW 2.3: Realtek LAN compiled drivers for RTL8111/8168B  (Read 99868 times)
mrkroket
Hero Member
*****
Offline Offline

Posts: 495
« Reply #15 on: Thursday 06 May 2010, 07:02:09 am »
What is the output of the command ethtool -i ethX on all ethernet interfaces (eg. ethtool -i eth0, ethtool -i eth1, etc.....)??
Logged
vnet
Jr. Member
*
Offline Offline

Posts: 3
« Reply #16 on: Thursday 06 May 2010, 08:53:43 am »
Quote from: mrkroket on Thursday 06 May  2010, 07:02:09 am
What is the output of the command ethtool -i ethX on all ethernet interfaces (eg. ethtool -i eth0, ethtool -i eth1, etc.....)??

Here's the output:
Code:
root@efw # ethtool -i eth0
driver: skge
version: 1.11
firmware-version: N/A
bus-info: 0000:05:00.0

root@efw # ethtool -i eth1
Cannot get driver information: No such device

I've checked to make sure that the ethernet device hasn't randomly ended up as ethX where X is any value up to 9. Smiley

It almost seems like the device isn't in the computer, but being onboard and having the network support turned on in the BIOS makes me think it is.  I'm almost to the point of trying it on a duplicate machine to ensure it isn't a hardware issue.

EDIT:
I've just done a new install on a duplicate system (all hardware is exactly the same brand and model) and have the same issue, it appears that it isn't faulty hardware.
Logged
vnet
Jr. Member
*
Offline Offline

Posts: 3
« Reply #17 on: Thursday 06 May 2010, 03:48:26 pm »
I've diagnosed the issue....

Basically an onboard Realtek 8111DL doesn't work with a D-Link DGE-530T PCI card.

Here's a summary of my diagnosis:

Code:
root@efw # lspci
00:00.0 Host bridge: Intel Corporation Unknown device a000 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Unknown device a001 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation Unknown device 27bc (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
05:00.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)

As you can see, the Realtek isn't detected.  So I removed the D-Link from the system:

Code:
root@efw # lspci
00:00.0 Host bridge: Intel Corporation Unknown device a000 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Unknown device a001 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation Unknown device 27bc (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd RTL8111/8168B PCI Express Gigabit Ethernet Controller (rev 03)

The Realtek is now detected.  Now I add a Netgear FA310TX:

Code:
root@efw # lspci
00:00.0 Host bridge: Intel Corporation Unknown device a000 (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Unknown device a001 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation Unknown device 27bc (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd RTL8111/8168B PCI Express Gigabit Ethernet Controller (rev 03)
05:00.0 Ethernet controller: Lite-On Communications Inc LNE100TX (rev 20)

An ifconfig now tells me i have eth0 and eth1.

My next problem is finding a new half-height gigabit ethernet card that won't stop me from using the onboard Realtek.
Logged
TheEricHarris
Full Member
***
Offline Offline

Posts: 86
« Reply #18 on: Friday 06 August 2010, 03:22:51 am »
Did you figure this out?  I have two onboard Broadcomm NICs that detect fine but my PCI-X RealTek card won't detect.  Getting really frustrated.
Logged
m-cd
Jr. Member
*
Offline Offline

Posts: 5
« Reply #19 on: Thursday 02 September 2010, 04:10:30 pm »
Hi All!
Could this driver be used on EFW 2.4 or we need to wait devel-rpms 2.4 in order to recompile it?
TIA
Karl
Logged
mrkroket
Hero Member
*****
Offline Offline

Posts: 495
« Reply #20 on: Monday 06 September 2010, 12:32:15 am »
You actually have de devel rpms on Sourceforge, so you can compile it.
I think the former driver won't work on EFW 2.4, different kernel.

I recompiled the driver for EFW 2.4 PAE. Prior to install it you must change the kernel to PAE (sorry, there are no kernel sources for standard one).
EFW 2.4 PAE : Realtek LAN compiled drivers for RTL8111/8168B
http://www.megaupload.com/?d=4SDF7E81


Steps to change kernel:

efw-upgrade
smart install kernel-PAE
reboot

After that you can use the compiled driver I put here.
Logged
m-cd
Jr. Member
*
Offline Offline

Posts: 5
« Reply #21 on: Tuesday 07 September 2010, 05:59:52 pm »
Hi mrkroket!
Thanks a lot for driver.
I try it and report back here my experience.
Bye 4 now!
Karl
Logged
Pages: 1 [2] Go Up Print 
« previous next »
Jump to:  

Page created in 0.125 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com