Hi all.

I want to setup a private VPN connection for a client who wants to connect to their office network off-site. I did a search on this forum for a how-to, but couldn't find anything. Can anyone help me setup EFW Community as a VPN server? Is this even possible or do I need to look elswhere?

Any help would be greatly appreciated.

maybe you have boot in efi mode?

it seams still a problem in 2023 to install Endian Fw on a EFI only system.

I can enter grub, but after select the boot entry, there is no output.

It seams that the efi framebuffer driver is not compiled in.
The system boots in background - when it is up i get a beep all secounds.
It also reacts on sysrq reboot request (CTRL+ALT+PRINT and REISUB)

I also tested some kernel params, like nomodeset and video=vesa / video=efifb:list ... but all without success.

to bad, I would give it a try... but without console it seams not be possible for me.

Is there any way to upgrade Community version 3.3.22 to version 5 or 6

Fixed it.  Do not know why I did not think of this sooner.

Translate to Section:
Type: IP
Insert IP: < I just added some random IP address that is not in our network. >
Port/Range: Blank
NAT: NAT

Ok so if anyone would read this in the future...

the problem was with community.rules set

while trying to test the config:

snort -T console -q -c /etc/snort/snort.conf -i eht0
ERROR: /var/signatures/snort/processed/custom/snort3-community.rules(16) Unknown rule option: 'service'.
Fatal Error, Quitting..

deleted community rule set trough gui and now everything works !

Hi !

using Endian community 3.3.21 OS on some miniPC with two ethernets.

trying to enable Intrusion detection system but although the switch is green, the status says its OFF.

Is there any bug or additional configuration needed to get this working ?

Or was the support for IDS canceled on community edition ?

Can someone please help ?

Thanks,

David.

Tengo instalado el Endian 3.3.2 pero no bloquea los sitios de youtube.com facebook.com en lista negra en web filter y es transparente, me podría ayudar,  de ante mano muchas gracias

Good Morning,

I'm installed a WiFi card TP-Link AC1200 that uses intel 7265 chip.
This is not recognized ad network wifi card.


the first one is the wifi card.

Any idea?

Thank you

the last one is the card

Hi all.

I am trying to use a third NIC (Apple USB ethernet adaptor) as a second uplink (for failover).  I had this working with a previous but old version of Endian (not the Community Edition).  However, the appropriate module (asix I believe) isn't available in the Community edition (v3.3.19).  

Any advice on how to get this Apple USB NIC (a1277) working with Endian CE?

lsusb shows:

Bus 001 Device 002: ID 05ac:1402 Apple, Inc. Ethernet Adapter [A1277]
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x05ac Apple, Inc.
  idProduct          0x1402 Ethernet Adapter [A1277]
  bcdDevice            0.01
  iManufacturer           1 Apple Inc.
  iProduct                2 Apple USB Ethernet Adapter
  iSerial                 3 0E429C
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          4 0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              250mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol      0
      iInterface              7 0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              11
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x03  EP 3 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol         0
  bMaxPacketSize0         8
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)


Thanks.
HL