Welcome, Guest. Please login or register.
Did you miss your activation email?
Monday 09 December 2024, 09:29:31 pm

Login with username, password and session length

Download the latest community FREE version  HERE
14261 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  Installation Support
| | |-+  No connection from outside
0 Members and 0 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: No connection from outside  (Read 12823 times)
glynd
Full Member
***
Offline Offline

Posts: 10


« on: Wednesday 25 November 2009, 02:11:51 am »

I have just set up Endian 2.3 and cannot ping or connect to port 25 from the outside. I have port forwarding set up and I think it is right but....
I have downloaded the configuration but there does not seem to be a way of uploading it for some help, unless I am missing something.

The port-forwarding I have set is from the Red uplink to the green network and a specific IP address. I have included the port in this case 25 in both the source and the target. I have also set up outbound forwarding for port 25. I can telnet to an outside mail server from inside to port 25 but not from outside to in.

How else do I describe how I have it set up?
TIA
Glyn
Logged
nopyobe
Full Member
***
Offline Offline

Posts: 13


« Reply #1 on: Thursday 03 December 2009, 01:41:57 am »

When you say "from the outside", where are you connecting from? Many ISP's will block port 25, so if you are trying to connect from across service providers, you may not be able to connect to that port.

My suggestions would be to hook a PC to your WAN port configured with a static IP so that the WAN interface on your Endian FW can communicated with the PC in a "testbed" environment.  Then try to connect to port 25 on the Endian FW to see if it is port forwarded to your internal machine.

Nopyobe
Logged
glynd
Full Member
***
Offline Offline

Posts: 10


« Reply #2 on: Thursday 03 December 2009, 08:27:47 pm »

Hi Nopyobe, Thanks for this. I did manage to sort it out though. The problem was more my understanding of how to configure efw. It is not exactly intuitive to my mind. I thought the traffic is coming in on the red interface and I want to go to an IP address on the green network. So I configured it such. I had to change it to source - any interface, target - any interface and the IP address of the target host, and then it worked.

Anyway, again thanks for the concern.
Cheers
Glyn
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.125 seconds with 18 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com