|
Title: serial console access Post by: dorf on Tuesday 24 February 2009, 08:04:08 am I have two WYSE WY55 dumb terminals here and previously had one connected to the IPCop machine that my Endian box has replaced. I'm using 2.2rc3, and have set /etc/inittab as:
# Run agetty on COM1/ttyS0 and COM2/ttyS1 s0:2345:respawn:/sbin/agetty -L -f /etc/issueserial 9600 ttyS0 vt100 s1:2345:respawn:/sbin/agetty -L -f /etc/issueserial 38400 ttyS1 vt100 As I found in a HowTo and referred to here... but all I get on the WY55 is gibberish. I'm looking for any suggestions here on how I can get in via this terminal, I have been able to access the machine when I connect another PC via serial cable and minicom... and the terminal worked fine on the IPCop box, so I'm at a loss. Thanks, rjv |