EFW Support

Support => VPN Support => Topic started by: inaopul on Thursday 14 June 2012, 02:16:48 am

Title: route all trafic cliente for OPENVPN
Post by: inaopul on Thursday 14 June 2012, 02:16:48 am

I configured that all traffic route for VPN but in the route table no apear GW and the trafic pass for the GW of the local network

I can do?

Title: Re: route all trafic cliente for OPENVPN
Post by: kashifmax on Thursday 14 June 2012, 05:53:11 pm

When you add vpn subnet under VPN > Sever Configuration > Global Settings, then EFW(2.5.1) will automatically going to add the subnet in routing table...

Code:

Destination   Gateway       Genmask       Use Iface
VPN          0.0.0.0       255.255.255.0   tap0
GREEN        0.0.0.0       255.255.255.0   br0
RED          0.0.0.0       255.255.255.0   eth2
0.0.0.0      REDGW         0.0.0.0         eth2

Title: Re: route all trafic cliente for OPENVPN
Post by: inaopul on Thursday 14 June 2012, 10:38:57 pm

kashifmax thanks fo u answer :D ,

but I not have GW in the client only have ip address, and the route table appear all routes but the traffic is for the local GW not for VPN