Can't access AS400 in Orange from outside

[Guest]

[mrkroket]

Try to add 87.x.x.248 as an alias then...

As you said your ADSL/modem has the LAN IP (191.x.x.1), I'm supposing that is in routing mode (not in true bridging), so I imagine your modem is sending the traffic to some machine with IP in 191.x.x.? subnet (the so called Zyxell external IP).

[faber1965]

Yes, I checked it this afternoon, the AS400 we are testing hasn't its public IP. This confirm the results form TheDude.

Tomorrow I'll try new settings and let you know.

Thanks, Faber

[faber1965]

OK SOLVED!

First of all I configured the AS400 with its proper Public IP 87.x.x.248

On Endian:
- Added 87.x.x.248 as alias in network interfaces
- Added new Destination NAT rule under Port Forward-NAT

• Source: Any Uplink
• Destination: Uplink Main/87.x.x.248
• Allow: Without IPS
• Protocol: Custom - TCP
• Ports: 23 & 449
• NAT: do NAT
• Traslate into IP: 10.x.0.100

Source NAT: no rules
Incoming Routed Traffic: no rules
System Access: default rules
Interzone Firewall: default rules

That's all.
It didn't worked on the fly, after these updates I didn't connect yet, but in minutes everything went up and the AS400 was there.
All attempts to connect to are logged as I requested.

Then I turned back on my HTTP proxy (SQUID) for content filtering and SNORT for intrusion detection.
For future reference, I did a PrintScreen of all setup pages and a backup of working configuration.

I want to thank mrkroket for his kind help, and hope this could be useful for someone else.

Faber