Built-in Temperature Monitoring

[Guest]

[john_cic]

I found this article which explains how to setup temperature monitoring on Endian Firewall 2.3 - http://andrew-stephanie.ca/endian-firewall-tips

Has anyone set this up or something similar?

I want to be able to monitor temps, fan speeds, etc if possible...

[seh2000]

Yes, I followed the instructions found here cyberciti.biz/faq/howto-linux-get-sensors-information when I enter the command "sensors" in the 'web console' I get this result:

coretemp-isa-0000
Adapter: ISA adapter
Core 0:   +61.0 C   (crit = +100.0 C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:   +61.0 C   (crit = +100.0 C)

What I would like to have is the hddtemp application, but I am not too sure how to get/load the module...Ideas?


Steen

[medhome]

After setup  from console, I Got

smsc47b397-isa-0a80
Adapter: ISA adapter
fan1:       1908 RPM
fan2:          0 RPM
fan3:          0 RPM
fan4:       2461 RPM
temp1:       +44.0 C
temp2:       +28.0 C
temp3:       +29.0 C
temp4:        +0.0 C

Config  HP ML110 core2DUO

[seh2000]

medhome,

How you managed that much info?
All I can get is the core temp.
You use any extra application or?

Steen