|
Title: Port forwarding from specific public IP Post by: mtrussa on Sunday 01 November 2009, 06:03:53 am Hello!
In a configuration environment I have to allow 2 public IP addresses (not belonging to me but to a customer) to access a webserver in my orange net. In portforwarding I can setup to forward from my uplink port 80 to my webserver port 80, but I can't specify that I want to allow access only if the source IPs are the ones that my customer gave to me!.... I don't need to open up my webserver to the whole Internet but only to specific source IPs. Any suggestion? Thanks a lot, Mattia Title: Re: Port forwarding from specific public IP Post by: kevsworld on Saturday 07 November 2009, 09:13:40 am not sure if you are using ver 2.2 or 2.3.
In 2.3 (definately can do in 2.2 aswell but I have upgraded to 2.3 and dont remember the extact settings): Firewall > Destination NAT > New Rule In the Access from box choose Network/IP/Range and put the two pulic IP's your customer gave you in there. Now choose Uplink (specific or any) choose service HTTP and in the translate to bit fill in the IP of your orange webserver. |