|
Title: Route 2 LAN Post by: hermeti-k on Friday 13 August 2010, 11:43:31 pm Hi guys!
I need to install efw and make it route between 2 lans. The lans are: A. 10.0.200.0/24 B.192.168.33.0/24 RED: 10.0.200.100 GREEN: 192.168.33.100 I have enabled in the firewall te acces from 10.0.200.0/24 I can ping from the subnet B to A, but not from A to B. Any help? Title: Re: Route 2 LAN Post by: noob on Monday 16 August 2010, 12:01:04 am I am not sure what you are trying to accomplish here but this will make PING work:
Go to "Firewall" Port Forwarding/NAT -> Incoming Routed Traffic: Source = RED Destination = ZONE = GREEN Service Port = ANY Protocol = ICMP This will allow PING through the RED interface, but as I stated I am not sure what you are trying to accomplish here. If you are you just using this as a router to pass traffic between these networks, you will need to setup the following rule: Source = RED Destination = ZONE = GREEN Service Port = ANY Protocol = ANY This of course defeats the purpose of the firewall, as it will pass everything through the RED interface. I hope this helps! |