|
Title: Static routing not working Post by: edisoft on Friday 24 October 2008, 01:19:13 am Hi,
we are testing version 2.2 rc3 and have a network behind a router that is on Green network. The supposed solution is on the knowledge base (http://kb.endian.com/entry/28/) but is not working for us. We add the route like in the knowledge base but then its not get added to the routing table. I can add the route manually and works so something must be wrong. Thanks in advance. Marco Title: Re: Static routing not working Post by: npeterson on Friday 24 October 2008, 08:40:16 am Dont forget to make 2 routes
Source -> Destination -> VIA(your firewall's IP address on desination subnet) 10.1.2.0/24 -> 10.1.3.0/24 -> 10.1.3.1 10.1.3.0/24 -> 10.1.2.0/24 -> 10.1.2.1 Title: Re: Static routing not working Post by: ocelot on Wednesday 10 December 2008, 05:59:33 am Hi everybody! it's my first post here!
Same problem here: via terminal works fine, but via web browser nothing happens... Anyone have an idea why this is occurring? ??? Title: Re: Static routing not working Post by: smk986 on Thursday 11 December 2008, 08:02:14 pm Also confirming unable to add static route in web interface. release 2.2.rc3 ??? I can successfully add routes via CLI which do work. :) route add -net 192.168.40.0/24 gw 192.168.0.253 I have 9 remote subnets behind one router connected on green. network_behind_router --GW-------------------- router ----------- green_iface_of_efw 192.168.40.0/24 | 192.168.50.250 | \ 192.168.51.0/24 | 192.168.51.250 | \ 192.168.52.0/24 | 192.168.52.250 | \ 192.168.52.0/24 | 192.168.53.250 | \ 192.168.53.0/24 | 192.168.54.250 | |- 192.168.50.250 <---> 192.168.0.253 192.168.54.0/24 | 192.168.55.250 | / 192.168.55.0/24 | 192.168.56.250 | / 192.168.56.0/24 | 192.168.57.250 | / 192.168.70.0/24 | 192.168.70.250 | / Title: Re: Static routing not working Post by: ocelot on Friday 12 December 2008, 03:38:06 am To make persistent the routes added mannually, just edit the file: /var/efw/inithooks/start.local with your static routes before the "exit 0".
Like this: #!/bin/sh route add -net 10.0.1.0/24 gw 10.0.5.1 route add -net 10.0.2.0/24 gw 10.0.5.1 exit 0 Title: Re: Static routing not working Post by: gyp_the_cat on Saturday 17 January 2009, 03:15:47 am Don't forget to add the subnets to the Proxy - HTTP - Configuration - Allow Subnet per Zone under the correct heading.
Title: Re: Static routing not working Post by: boodeey on Friday 29 May 2009, 01:53:21 pm i got the same problem ... i've try to change allowed subnet perzone or even disable http proxy manually routing by console .... and i still got the problem
|