|
Title: Problem in setting up Endian Community release 2.2 as an Internal Firewall Post by: kushan on Friday 23 October 2009, 07:21:36 pm Hi
Endian Community release 2.2 is needed to be configured as an Internal firewall for our office network. We have two networks as user network and server network. RED Zone - User network GREEN Zone - server farm We have already configured the firewall in way that we can ping to the green interface form the user network. But we couldn't ping to the servers from the user network. However we can ping to the user network computers from the server network. We can't configure a rule to access servers from user network. Please be kind enough to guide me on this matter. Thanks in advance. Kushan Sharma Title: Re: Problem in setting up Endian Community release 2.2 as an Internal Firewall Post by: danodemano on Wednesday 28 October 2009, 07:33:01 am I suspect you may need to do a one-to-one NAT and/or some port forwarding. A basic diagram of the network would probably help out a bit, along with what the "server farm" does (I.E. Web servers, application servers, SQL servers, etc.). This should not be all that hard to set up I wouldn't think.
|