I'm getting a constant error trying to set up an ipsec tunnel in 2.2 b2.
Jan 20 14:03:10 core ipsec__plutorun: /usr/lib/ipsec/_plutorun: line 237: 12055 Aborted /usr/libexec/ipsec/pluto --nofork --secretsfile /etc/ipsec/ipsec.secrets --ipsecdir /etc/ipsec/ipsec.d --debug-crypt --debug-parsing --debug-emitting --debug-control --debug-klips --debug-dns --debug-nat_t --use-auto --uniqueids --nat_traversal --virtual_private '[CLIPPED FOR SECURITY]'
Jan 20 14:03:10 core ipsec__plutorun: 003 ASSERTION FAILED at alg_info.c:844: buflen >= 0
Jan 20 14:03:10 core ipsec__plutorun: 000 %myid = (none)
Jan 20 14:03:10 core ipsec__plutorun: 000 debug crypt+parsing+emitting+control+klips+dns+nattraversal
Jan 20 14:03:10 core ipsec__plutorun: 000
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm ESP encrypt: id=3, name=ESP_3DES, ivlen=64, keysizemin=192, keysizemax=192
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm ESP encrypt: id=12, name=ESP_AES, ivlen=128, keysizemin=128, keysizemax=256
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm ESP auth attr: id=1, name=AUTH_ALGORITHM_HMAC_MD5, keysizemin=128, keysizemax=128
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm ESP auth attr: id=2, name=AUTH_ALGORITHM_HMAC_SHA1, keysizemin=160, keysizemax=160
Jan 20 14:03:10 core ipsec__plutorun: 000
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE encrypt: id=5, name=OAKLEY_3DES_CBC, blocksize=8, keydeflen=192
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE encrypt: id=7, name=OAKLEY_AES_CBC, blocksize=16, keydeflen=128
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE hash: id=1, name=OAKLEY_MD5, hashsize=16
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE hash: id=2, name=OAKLEY_SHA1, hashsize=20
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE dh group: id=2, name=OAKLEY_GROUP_MODP1024, bits=1024
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE dh group: id=5, name=OAKLEY_GROUP_MODP1536, bits=1536
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE dh group: id=14, name=OAKLEY_GROUP_MODP2048, bits=2048
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE dh group: id=15, name=OAKLEY_GROUP_MODP3072, bits=3072
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE dh group: id=16, name=OAKLEY_GROUP_MODP4096, bits=4096
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE dh group: id=17, name=OAKLEY_GROUP_MODP6144, bits=6144
Jan 20 14:03:10 core ipsec__plutorun: 000 algorithm IKE dh group: id=18, name=OAKLEY_GROUP_MODP8192, bits=8192
Jan 20 14:03:10 core ipsec__plutorun: 000
Jan 20 14:03:10 core ipsec__plutorun: 000 stats db_ops.c: {curr_cnt, total_cnt, maxsz} :context={0,0,0} trans={0,0,0} attrs={0,0,0}
Jan 20 14:03:10 core ipsec__plutorun: 000
Jan 20 14:03:10 core ipsec__plutorun: 000
Jan 20 14:03:10 core ipsec__plutorun: 000
Jan 20 14:03:10 core ipsec__plutorun: ...could not add conn "TEST"
Jan 20 14:03:10 core ipsec__plutorun: whack: is Pluto running? connect() for "/var/run/pluto/pluto.ctl" failed (111 Connection refused)
Jan 20 14:03:10 core ipsec__plutorun: whack: is Pluto running? connect() for "/var/run/pluto/pluto.ctl" failed (111 Connection refused)
Jan 20 14:03:10 core ipsec__plutorun: ...could not route conn "TEST"
Jan 20 14:03:10 core ipsec__plutorun: whack: is Pluto running? connect() for "/var/run/pluto/pluto.ctl" failed (111 Connection refused)
Jan 20 14:03:10 core ipsec__plutorun: ...could not start conn "TEST"
Jan 20 14:03:10 core ipsec__plutorun: !pluto failure!: exited with error status 134 (signal 6)
Jan 20 14:03:10 core ipsec__plutorun: restarting IPsec after pause...
Jan 20 14:03:24 core ipsec__plutorun: Restarting Pluto subsystem...