|
Title: Dual wan configuration ? Post by: Maestrale on Tuesday 04 May 2010, 11:45:12 pm I' m trying endian and it works very fine , I know there is a problem with failover config... but
if i want to use 2 uplink in this way ? main uplink for http ftp and other service.... secondary uplink only for the mail service (I have the mail server in green at 192.168.1.200) Is possible to do this ? If yes how ? I have try to configure a rule in the outgoing firewall but i have fail :( somebody can help me ? tanks in advice Title: Re: Dual wan configuration ? Post by: mrkroket on Wednesday 05 May 2010, 02:47:30 am It's perfectly possible, as I'm using it this way.
Just go to Network->Routing->Policy Routing and add a rule to send traffic by Port to a different uplink. Place it 1st. # Source Destination ToS Via Gateway Service Remark 1 <ANY> <ANY> WAN2 TCP (110 & 25) Mail WAN2 Apply and check your dashboard to see if Mail traffic now uses Wan #2 Just a note. There is a limitation about routing HTTP/HTTPS traffic. It seems that always will go to Main uplink (at least with HTTP Proxy enabled). Title: Re: Dual wan configuration ? Post by: Maestrale on Wednesday 05 May 2010, 05:13:11 pm Many tanks Mrkroket.
I will try your setting in the evening |