Title: NAT 1:1 Post by: ilranzani on Thursday 15 May 2014, 11:33:34 pm Dear Endian users...
I try in any way to make working a simple ONE-TO-ONE 1:1 NAT but without success. SNAT: GREEN-IP RED-IP any auto works but only for outcoming connections DNAT: UPLINK GREEN-IP any any works but only when request the uplink address ex. My GREEN: 192.168.1.0/24 My RED: 172.16.1.0/24 I need a 1 to 1 NAT for: 192.168.1.11 172.16.1.2 192.168.1.12 172.16.1.4 192.168.1.13 172.16.1.5 192.168.1.14 172.16.1.7 192.168.1.15 172.16.1.9 192.168.1.22 172.16.1.12 192.168.1.23 172.16.1.13 ... for all ports, from RED to GREEN and GREEN to RED.... (192.168.1.1 and 172.16.1.1 is my FW connected with my 2 eth switches) IS IT POSSIBLE???? HOW IS IT POSSIBLE???? Title: Re: NAT 1:1 Post by: ilranzani on Friday 16 May 2014, 05:20:30 pm YES 8)
Found: endian.com/fileadmin/documentation/efw-admin-guide/en/efw-admin-guide.html#efw.network.aliases >:( >:( >:( >:( >:( >:( DAMN INTERFACE AND POOR GUIDE!!!! Title: Re: NAT 1:1 Post by: ilranzani on Monday 19 May 2014, 08:18:15 pm >:( >:( >:(
DNAT do not consider the incoming and outcoming firewall policies! IS IT POSSIBLE THAT IN A 2014 FIREWALL THERE'S NOT A 1:1 NAT OPTION?!?!??!?!?!?!?!?!?!!? ORRIBLE, switch to PFSENSE |