EFW Support
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
Friday 13 December 2024, 04:21:01 pm
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Visit the Official Endian Bug tracker
HERE
14261
Posts in
4377
Topics by
6517
Members
Latest Member:
Sandro
Search:
Advanced search
EFW Support
Support
General Support
Pls advise me how to set the VLAN in Endian 2.5
0 Members and 2 Guests are viewing this topic.
« previous
next »
Pages:
[
1
]
Author
Topic: Pls advise me how to set the VLAN in Endian 2.5 (Read 22657 times)
ducvt
Jr. Member
Offline
Posts: 3
Pls advise me how to set the VLAN in Endian 2.5
«
on:
Wednesday 29 May 2013, 12:22:38 pm »
Dear All,
I have 2 interfaces in my endian FW 2.5.1 community version.
One is used for WAN (connected to ADSL Router) and other to the local network. I have segregated the network using VLANS on the switch Cisco (2 VLANS) VLAN 16:172.16.x.x, VLAN 17:172.17.x.x
Problem is when connect Cisco Switch to Green interface(172.16.1.1), Endian only detected ip from VLAN, can not see ip from VLAN 17.
Please advise me, how to config on Endian or Switch for Endian can detect and manager both VLANs?
Logged
ducvt
Jr. Member
Offline
Posts: 3
Re: Pls advise me how to set the VLAN in Endian 2.5
«
Reply #1 on:
Thursday 30 May 2013, 08:03:04 pm »
Nobody can help me
Logged
Syntax42
Full Member
Offline
Posts: 19
Re: Pls advise me how to set the VLAN in Endian 2.5
«
Reply #2 on:
Thursday 30 May 2013, 10:58:43 pm »
Why do you have a VLAN? They segregate your network, which makes it so devices can not talk to each other without being routed.
In order for EFW to route traffic from a VLAN, it must have an IP address inside the VLAN's network. The only way to achieve this that I know of is to add a third network interface. You could try adding an extra IP address to the green interface, then bridge the two greens together, but that goes beyond my knowledge of Linux.
Logged
ducvt
Jr. Member
Offline
Posts: 3
Re: Pls advise me how to set the VLAN in Endian 2.5
«
Reply #3 on:
Wednesday 05 June 2013, 02:38:18 pm »
Thanks for your advice, we have VLAN because we have 2 groups in LAN and i dont want they talk to each other(avoid packet sniffer in LAN) , any suggestions about that?
Logged
juddyjacob
Full Member
Offline
Posts: 64
Re: Pls advise me how to set the VLAN in Endian 2.5
«
Reply #4 on:
Friday 30 August 2013, 05:03:43 am »
Endian does support VLans under Network, Interfaces, VLAN. You do need to have the switch port in trunk mode otherwise you will lock yourself out.
Logged
Pages:
[
1
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Announcements
-----------------------------
=> Project News
=> Latest News and Updates
-----------------------------
Support
-----------------------------
=> General Support
=> Installation Support
=> EFW SMTP, HTTP, SIP, FTP Proxy Support
=> VPN Support
=> Hardware Support
-----------------------------
Development
-----------------------------
=> EFW Wishlist
=> Contribute Your Customisations & Modifications
Page created in 0.078 seconds with 19 queries.
Powered by SMF 1.1 RC2
|
SMF © 2001-2005, Lewis Media
Design by
7dana.com