EFW Support
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
Friday 27 December 2024, 07:11:12 am
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Download the latest community FREE version
HERE
14262
Posts in
4377
Topics by
6517
Members
Latest Member:
Sandro
Search:
Advanced search
EFW Support
Support
General Support
Endian Jumbo Frame
0 Members and 0 Guests are viewing this topic.
« previous
next »
Pages:
[
1
]
Author
Topic: Endian Jumbo Frame (Read 8205 times)
bautzen
Full Member
Offline
Posts: 13
Endian Jumbo Frame
«
on:
Wednesday 30 June 2010, 08:58:23 pm »
Hi to all, I would like to know if it could be possible to change MTU to 2 internal NIC on efw2.4. I other words I have something like this:
SCENARIO:
[SERVER SBS 2003 WITH ISA 2004]
* NIC1 to internal lan (10.1.0.6/16) with MTU 1500 (it's main gateway for the clients)
* NIC2 to DMZ lan (172.16.0.100) with MTU 1500. Through this inet my LAN clients exit to intenet
[ENDIAN EFW 2.4]
* NIC1 to internal lan and for OpenVPN connections (10.1.0.254/16) and (10.3.0.254/16) MTU1500
* NIC2 to DMZ (172.16.0.254/24) MTU1500
* NIC3 to "Service LAN" for NAS, iSCSI, NFS etc (10.2.0.254/16) MTU1500
* NIC4 to ISP Router (192.168.0.253/24) and gw 192.168.0.254 (router cisco) MTU1500
My SBS2003 Premium doesn't accept a third NIC for Service LAN for that reason I have to route the traffic through endian gateway (10.1.0.254) to reach 10.2.0.0 net
Now form my SBS I can quite open my NAS on 10.2.0.10 and connect to iSCSI Target correctly but the performance are non so good.
My NAS has MTU 9000 and if I create a new server on Service LAN and I enable jumbo frame I can quite ping the NAS correctly (ping -f -l 8900 10.2.0.10).
If I enable Jumbo Frame on my NIC1 on SB2003, after I have the bottleneck on my endian firewall!!!
MY questions are:
1) If I enable the jumbo frame on internal NIC1 of my SBS2003, could I have some problems on client's side? The NIC1 is also default gateway for the lan to surf internet!!!!
2) There is a way to change MTU on endian for the NIC1 and NIC3 and if yes what problems could I have for the web surfing and publishing of my intranet web applications?
If someone have a better solution, please let me know
Sincerely best regards
Patrick
Logged
Pages:
[
1
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Announcements
-----------------------------
=> Project News
=> Latest News and Updates
-----------------------------
Support
-----------------------------
=> General Support
=> Installation Support
=> EFW SMTP, HTTP, SIP, FTP Proxy Support
=> VPN Support
=> Hardware Support
-----------------------------
Development
-----------------------------
=> EFW Wishlist
=> Contribute Your Customisations & Modifications
Page created in 0.047 seconds with 19 queries.
Powered by SMF 1.1 RC2
|
SMF © 2001-2005, Lewis Media
Design by
7dana.com