Welcome, Guest. Please login or register.
Did you miss your activation email?
Saturday 28 December 2024, 08:25:55 am

Login with username, password and session length

Get the new Updates directly from Endian  HERE
14262 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  General Support
| | |-+  Cannot login at Outside the network
0 Members and 0 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Cannot login at Outside the network  (Read 22577 times)
hinge
Full Member
***
Offline Offline

Posts: 93


« on: Monday 08 June 2009, 01:40:35 pm »

How to connect to endian server when im outside the network or even on the hot spot wifi area?  i try this https://Public IP address:10443, but i cannot connect but when im in over the network using this https://192.168.1.1:10443 i connect.. Anyone can give an idea please...
Logged
Steve
Sr. Member
****
Offline Offline

Posts: 108



WWW
« Reply #1 on: Monday 08 June 2009, 03:37:21 pm »

You need to forward TCP port 10443 to the firewall itself.

Go to:  Firewall ==> System Access ==> Add a new system access rule

Add the following rule:
Source address = nothing (You can add an IP address if you want)
Source interface = Red
Service: = Any
Protocol: = TCP
Destination port (one per line): = 10443
Policy = ALLOW
Enabled = Tick

Save your rule.

Now you can access your firewall from the outside (Internet) by going to:    https://FIREWALL.PUBLIC.IP:10443/
Logged

                          
hinge
Full Member
***
Offline Offline

Posts: 93


« Reply #2 on: Monday 08 June 2009, 05:31:31 pm »

hi! Steve.. i try your instruction clearly. but my browser apper is Network Timeout on Mozilla and my IE is Cannot Display. and itry to select under Source interface = Red i change to ANY but still i cannot connect from other network.. What maybe the error or they other configuration they need to do?
Logged
Steve
Sr. Member
****
Offline Offline

Posts: 108



WWW
« Reply #3 on: Monday 08 June 2009, 07:12:31 pm »

I just tested it by connecting to a server in the US via RDP and I can log into my firewall (I'm in Australia).
Are you sure you are using https and not http?


If you want to test that you have a path to your firewall from the internet, add the following rule:


Go to:  Firewall ==> System Access ==> Add a new system access rule

Add the following rule:
Source address = nothing
Source interface = Red
Service: = Any
Protocol: = ICMP
Destination port (one per line): = 8
Destination port (one per line): = 30
Policy = ALLOW
Enabled = Tick

Save your rule.


You should now be able to ping your firewall from the Internet.


If it still doesn't work, turn the Outgoing Firewall off.
Go to:
Firewall ==> Outgoing traffic
and click on 'Enable Outgoing firewall' so it is grey, not blue.



Good luck
Smiley









Logged

                          
hinge
Full Member
***
Offline Offline

Posts: 93


« Reply #4 on: Monday 08 June 2009, 09:05:45 pm »

hi! steve i try your instruction even ping did not work.. itry to disable the firewall it the same cannot ping.. what did you think i need to change my endian Firewall server? if i can back-up my endian and i make new the configuration and server and i restore my back up configuration it makes the error back? by the way thank you for answer my post ...
Logged
Steve
Sr. Member
****
Offline Offline

Posts: 108



WWW
« Reply #5 on: Monday 08 June 2009, 09:15:02 pm »

How is your modem connected infront of Endian?

If it is in Bridge mode, it should be OK - all traffic should be sent to Endian.
If your modem is not in Bridge mode, you must activate DMZ on your modem to send all traffic to your Endian RED IP address.



Logged

                          
akha666
Jr. Member
*
Offline Offline

Posts: 3


« Reply #6 on: Saturday 01 September 2012, 10:46:46 pm »

I search for this bug didn't find any soluation , I like EFW but i think I can't continue using it anymore till can I solve it
Logged
endianupdate
Full Member
***
Offline Offline

Posts: 53


« Reply #7 on: Friday 21 September 2012, 02:03:51 am »

akha666

There is no bug. To allow access to the EFW from outside of your network you must do as Steve said and create a new system access rule, you also must make sure that your router is configured to port forward traffic to the EFW red interface for port 10443.

Also, well done in resurrecting a 3 year old thread  Smiley
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.109 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com