EFW Support
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
Thursday 05 December 2024, 04:08:01 pm
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Download the latest community FREE version
HERE
14261
Posts in
4377
Topics by
6517
Members
Latest Member:
Sandro
Search:
Advanced search
EFW Support
Support
General Support
Dual WAN Load Balancing with Endian Firewall 3.0.5_B1 Community version
0 Members and 0 Guests are viewing this topic.
« previous
next »
Pages:
[
1
]
Author
Topic: Dual WAN Load Balancing with Endian Firewall 3.0.5_B1 Community version (Read 16662 times)
svritc_81
Full Member
Offline
Posts: 27
Dual WAN Load Balancing with Endian Firewall 3.0.5_B1 Community version
«
on:
Wednesday 20 January 2016, 07:42:59 pm »
This how to is to achieve
“Dual WAN Load Balancing with Endian Firewall 3.0.5_B1 Community version”
My Lab Setup as below:
<Dev> <IP Address/Sub Netmask> <Interface Description>
eth0=192.168.10.15/24 (LAN Green Interface)
<Dev> <IP Add/SN/GW> <Interface Description>
eth1=10.3.0.61/22/10.3.0.1 (ISP1 Main uplink Red01)
eth2=192.168.15.0/24/192.168.15.1 (ISP2 Bkp uplink Red02)
Note: for all interfaces static ip address (I never tested with dynamic ip addresses as my script wont work for that case)
Here are the steps:
Step 1: Manually configure all uplinks from web interface and later enable ssh to login to shell.
Step 2: remove gateway ip address from both uplinks as:
For ISP1 interface:
vim /var/efw/uplinks/main/settings
DEFAULT_GATEWAY=
For ISP2 interfce:
vim /var/efw/uplinks/uplink1/settings
DEFAULT_GATEWAY=
Step 3: Create new lines in below route table file at the end don’t remove existing lines:
vim /etc/iproute2/rt_tables
1 isp1
2 isp2
Step 4: add new line in sysctl.conf file:
vim /etc/sysctl.conf
net.ipv4.ip_forward = 1
net.ipv4.route.secret_interval = 0
Step 5: Create a startup file in init hooks file which loads on every boot
vim /var/efw/inithooks/start.local
#!/bin/bash
route del default
ip route add 10.3.0.0/22 dev eth1 src 10.3.0.61 table isp1
ip route add default via 10.3.0.1 table isp1
ip rule add from 10.3.0.61 table isp1
ip route add 192.168.15.0/24 dev eth2 src 192.168.15.15 table isp2
ip route add default via 192.168.15.1 table isp2
ip rule add from 192.168.15.15 table ISP2
ip route add default scope global nexthop via 10.3.0.1 dev eth1 weight 1 nexthop via 192.168.15.1 dev eth2 weight 1
Step 6: modify the file to execute:
chmod 755 /var/efw/inithooks/start.local
Step 7: Modify system local dns records as per your ISPs:
vim /etc/resolv.conf
nameserver 8.8.8.8
nameserver 4.2.2.2
and reboot EFW that’s all
Logged
svritc_81
Full Member
Offline
Posts: 27
Re: Dual WAN Load Balancing with Endian Firewall 3.0.5_B1 Community version
«
Reply #1 on:
Thursday 21 January 2016, 04:44:26 pm »
Dear Admin,
I am unable to attach while posting due to below error:
An Error Has Occurred!
The attachments upload directory is not writable. Your attachment or avatar cannot be saved.
Logged
mrkroket
Hero Member
Offline
Posts: 495
Re: Dual WAN Load Balancing with Endian Firewall 3.0.5_B1 Community version
«
Reply #2 on:
Friday 22 January 2016, 03:08:22 am »
I've not seen an admin for years. Better upload it to some filesharing service (google drive, dropbox, onedrive), make the file public and share the link here.
Logged
Pages:
[
1
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Announcements
-----------------------------
=> Project News
=> Latest News and Updates
-----------------------------
Support
-----------------------------
=> General Support
=> Installation Support
=> EFW SMTP, HTTP, SIP, FTP Proxy Support
=> VPN Support
=> Hardware Support
-----------------------------
Development
-----------------------------
=> EFW Wishlist
=> Contribute Your Customisations & Modifications
Page created in 0.078 seconds with 18 queries.
Powered by SMF 1.1 RC2
|
SMF © 2001-2005, Lewis Media
Design by
7dana.com