Hey Guys!
I am new to endian and I'm in trouble!
I have a Windows (20 windows servers) and network with Endian firewall / vpn / proxy, everything works smoothly.
Created a vpn to the company director, it connects but does not open the internal sites <//intranet - //erp/> need him to open the vpn internal sites.
My Windows server running AD / DNS / DHCP and Endian Firewall / VPN / PROXY
Follows the settings
Endian version 2.5.1 Community
Endian networks
- GREEN = 192.168.1.2/24
---------------------------------------------------------------------
OpenVPN COnfiguration
------------------------------------------------------------------------
OPENVPN
- NOT bridged
- VPN Subnet = 10.2.2.0/24
OpenVPN Account Setup
- Direct all clients through server - [not checked]
- push only global options to this client [checked]
Networks behind client: [10.2.2.2/24]
push nameserver and domain - [both not checked]
OpenVPN advanced settings
- 1194 / UDP
- Block DHCP - [NOT CHECKED]
- dont block traffic - [checked]
- allow multiple - [not checked]
Global push options:
- push these networks - enabled - [0.0.0.0/1 & 128.0.0.0/1]
- push nameserver - enabled - [192.168.1.1] (This is the address of my Windows server with DNS)
- push domain - enabled - [antlia.local]
-----------------------------------------------------------------------------------
VPN Firewall Configuration
--------------------------------------------------------------------------------------
Enable VPN Firewall
source = vpn (OpenVPN user) - User created
destination = RED, GREEN, Openvpn Server
Service = <ANY>
Policy = Allow w/ IPS
enabled = checked
--------------------------------------------------------------------------------
Again, with this setup I can connect to the network but do not have access to network drivers, I can not open internal pages and not access the printers. does not access the address of endian <//192.168.1.2:10443>.
---------------------------------------------------------------------------------
OpenVPN client Config
--------------------------------------------------------------------------------
client
float
dev tap
proto udp
remote MY_NETWORK_IP_STATIC 1194
resolv-retry infinite
persist-key
persist-tun
ca firewall.pem
auth-user-pass
pull
comp-lzo
verb 3
Please, help me!
Author