|
Title: connected to VPN, can ping my GW but not host on the LAN Post by: smalldragoon on Thursday 21 April 2016, 04:47:57 am Hi
I have my VPN configuration working as I can be connected to my FW remotely but being connected, I can not reach any of my LAN hosts. I can ping my internal FW Green IP address I'm using TAP, bridged to Green network ( with 1 IP as pool, outside of my DHCP range) I can see the TAP adapter assigned with right ip address on client side. I searched on forums and tried to create the NAT rule for VPN VPN -> Green service ANY -> nat to Green What am I missing ? thx Title: Re: connected to VPN, can ping my GW but not host on the LAN Post by: kdouglas on Wednesday 10 August 2016, 12:16:01 pm Good evening,
Am with the same problem, I connect,ping only the Endian but the others devices i cant access or ping. on the 3.0 version work perfectly but in this version not. Title: Re: connected to VPN, can ping my GW but not host on the LAN Post by: kdouglas on Wednesday 10 August 2016, 12:49:37 pm Got it!
After few hours I got to full connect OpenVPN in this 3.2.1 endian. After did established, i cant connect or ping, but i've created a NAT permitting the connection between all my VPN users to the green and red interfaces, follow the print from my configuration. "imageno.com/qof02d52y9pepic.html" Title: Re: connected to VPN, can ping my GW but not host on the LAN Post by: cocoalcazar on Wednesday 15 November 2017, 10:26:04 am please send again the image, i have the same problem. Gracias.
Title: connected to VPN can ping my GW but not host on the LAN Post by: Deetinetub on Saturday 25 November 2017, 05:55:27 am Region : UnitedStates
Model : TL-ER604W Hardware Version : V1 Firmware Version : ISP : Remote Clients connected to VPN cannot access LAN computers connected to the TL-ER604W. Configuration of IP Address Pool will not allow Remote Clients to be on same subnet as LAN computers connected to TL-ER604W. Is there a workaround that could provide this connectivity? The WHOLE point of remote VPN clients connecting is for access to LAN computers at the HOST end. Title: Re: connected to VPN, can ping my GW but not host on the LAN Post by: Ashveer on Saturday 25 November 2017, 04:23:08 pm Region: Mauritius
"2017-11-25 09:20:29";"[ApiManager] State changed from: "Error" to: "Error"" "2017-11-25 09:20:29";"[Http] js: { "setup" : { "enabled" : "true" }, "ssl" : { "init" : { "ca" : "", "verify_ca" : true }, "op" : { "auth" : "user-pass" } }, "vpn" : { "args" : "", "conf" : "openvpn.conf", "fallback_conf" : "openvpn-fallback.conf" } }" "2017-11-25 09:20:29";"[debug] action: stop" "2017-11-25 09:20:29";"[debug] reset: 1, close: 0" "2017-11-25 09:20:29";"[debug] user:" "2017-11-25 09:20:29";"[debug] user:" "2017-11-25 09:20:29";"[VPNManager] type:" "2017-11-25 09:20:29";"[Core] state: 0 (Idle)" "2017-11-25 09:20:29";"[Error] 0.40: Operation Successful" "2017-11-25 09:20:29";"[Http] valid: 0, id: sb, type: user-pass, url: , user: , path:" "2017-11-25 09:20:29";"[Core] valid: 0, id: sb, type: user-pass, url: , user: , path:" "2017-11-25 09:20:29";"[Proxy] Adding host:" "2017-11-25 09:20:29";"[debug] user:" "2017-11-25 09:20:29";"[debug] user:" "2017-11-25 09:20:29";"[VPNManager] type: user-pass" "2017-11-25 09:20:29";"[ApiManager] State changed from: "Error" to: "Idle"" "2017-11-25 09:20:29";"[ApiManager] State changed from: "Idle" to: "Idle"" Title: Re: connected to VPN, can ping my GW but not host on the LAN Post by: cocoalcazar on Wednesday 29 November 2017, 11:22:29 am Prueba con esto:
http://imageno.com/qof02d52y9pepic.html Saludos. |