Print Page - HowTo: Content filter profile with bypass link.

What you need.
............................
Endian (of course)
winscp
putty

Follow these steps

1. Go to Proxy > content filter > Create a new profile and name it bypass or whatever you want. (it must show something like this bypass (ContentX) remember this x number)

2. Go to Proxy > Access Policy > add a new policy and select the bypass profile.

3. Go to System > ssh access > enable ssh access.

4. fireup winscp or putty > open /etc/dansguardian/dansguardianfX.conf file where x is the number I ask you to remember (if you are using winscp you can right click on the file to edit it).

5. Browse to the section where it say

Code:

# temporary bypass blocks
bypass = 0
bypasskey = ''

Change the bypass=0 to whatever you want.(The value is in second, 300 is good)

6. In the same file, browse to the section where it say

Code:

#htmltemplate = 'custom.html'

remove # sign and change it to

Code:

htmltemplate= 'bypass.html'

7.make a copy of /usr/share/dansguardian/languages/select_your_language/templete.html file and name it bypass.html and place it to /usr/share/dansguardian/languages/select_your_language/ folder

8. Open /usr/share/dansguardian/languages/select_your_language/bypass.html file and insert the following code in suitable place make sure you don't break html rules.

Code:

<a href="-BYPASS-">Click here to bypass</a>

9. Open putty and issue this command

Code:

/etc/init.d/dansguardian reload

10. Test test test ;)

EFW Support

Development => Contribute Your Customisations & Modifications => Topic started by: whoiam55 on Monday 29 March 2010, 04:12:51 am