|
Title: Endian 2.5.1 Static Route Post by: Rushlow on Wednesday 03 October 2012, 03:01:45 am Hello,
I would like to add a Static Route to my endian firewall. I am able to use route add -net 192.168.0.0/16 gw 192.168.12.8 with out any issues, but after a reboot this route is deleted and needs to be added. I have setup routes in the GUI but they don't work as I would expect. Which from what I can tell is a Bug in the GUI I have done some work with rc.local but unable to get the route to add at boot. In the end I just need two routes added at boot route add -net 192.168.0.0/16 gw 192.168.12.8 route add -net 10.3.0.3/32 gw 192.168.6.159 Here is what I have tried so far I modified /etc/rc.d/rc.ipc echo "Setting up ip accounting" /etc/rc.d/helper/writeipac.pl /usr/sbin/fetchipac -S /etc/rc.d/init.d/rc.local I created /etc/rc.d/init.d/rc.local #!/Bin/sh route add -net 192.168.0.0/16 gw 192.168.12.8 route add -net 10.3.0.3/32 gw 192.168.6.159 exit 0 What am I missing? Title: Re: Endian 2.5.1 Static Route Post by: fqureshi on Wednesday 03 October 2012, 06:31:11 am Which Endian version you are running? I am using 2.5.1 and using static routes which I have defined through GUI and they are working without any issues.
Title: Re: Endian 2.5.1 Static Route Post by: fqureshi on Wednesday 03 October 2012, 06:39:57 am I am not sure if this will work for you but while doing some research to provide you with a solution I found that routing details are added to /var/efw/routing
My file has following enteries: on,X.X.X.X&X.X.X.X&,,UPLINK:main,,,,,,,, on,X.X.X.X/30,,X.X.X.X,For VC device,,,,,,, I have replaced real IPs with X.X.X.X :) Hope this might help you in some way.... Title: Re: Endian 2.5.1 Static Route Post by: steven on Tuesday 01 January 2013, 01:29:07 am We using 2.5.1 with static routes and they seem to be working fine.
Steve - Techtron Computers Title: Re: Endian 2.5.1 Static Route Post by: cmateski on Sunday 10 February 2013, 10:00:11 am Static routes entered via GUI work fine for me.
efw 2.5.1 Title: Re: Endian 2.5.1 Static Route Post by: Di4bLo on Tuesday 07 May 2013, 08:10:45 pm EFW 2.5.1 and I have the same problem. If I update a static route (via GUI or via SSH) it doesnt save anything.
Pay attention because I can see static routes on the GUI but not in the real config (status -> network status). Could you please check if it's the same for you? thank you. Title: Re: Endian 2.5.1 Static Route Post by: jamerson on Wednesday 22 May 2013, 08:03:29 am this issue is knowed in the previously version,
please update to 2.5.1 ! Title: Re: Endian 2.5.1 Static Route Post by: Di4bLo on Tuesday 28 May 2013, 06:06:08 pm What do you mean Jamerson? I have the 2.5.1 and I have the same problem.
Title: Re: Endian 2.5.1 Static Route Post by: Di4bLo on Thursday 06 June 2013, 01:00:35 am I solved saving the route commands manually to /etc/init.d/rc.local.
Something like #!/bin/sh route add -net 10.0.0.0/24 gw 192.168.0.2 exit 0 |