|
Title: Routing over IPsec-based VPN Post by: j.wolski on Wednesday 13 November 2013, 05:31:44 am Hi,
as they say, Fragen kostet nichts, I need professional advice with endian 2.5.1. I have two subnets e.g. 192.168.1.0/24 and 192.168.10.0/24 connected together through IPSEC. I can ping from 192.168.10.0/24 to 192.168.1.0/24, connect servers and so on. At 192.168.1.25, I have configured router between 192.168.1.0/24 and 10.10.5.0/24. In 192.168.1.0/24 subnet, after proper routing and host configuration, I can ping addresses from 10.10.5.0/24. I can not do this from 192.168.10.0/24. At 192.168.10.0/24, I have configured dns name for host that points to 10.10.5.17, later I have established routing that every traffic toward 10.10.5.0/24 should be transferred to 192.168.1.25 (it does not work) or to 192.168.1.1 (which does not work either), my 192.168.1.0/24 Endian. Last but not least, at 192.168.10.0/24 endian there are two red cards. Tracerouting 10.10.5.17 indicates that traffic goes to WAN instead of IPSEC VPN. Also, may be it is important, I can not ping proper hosts in 192.168.10.0 from 192.168.1.0 except Endian. If you please help, I would be grateful. Sincerely, Jacek Wolski, ZGN Mokotów Warszawa, Poland |