ASTERISK - Forwarding Rules

[Guest]

[blueangelsbr]

Hi,

I have an Elastix box behind my Endian 2.3 Community and my server cannot communicate with my VOIP provider now.

It was running fine behind my Linksys router using NAT. I replicated all rules setted in my router to Endian and now its not working.

I have set this rules:

From RED Uplink Main - Target RED - ANY - UDP+TCP : 10000 - 20000    =>    192.168.0.150    Elastix RTP    
From RED Uplink Main - Target RED - ANY - UDP+TCP : 5004 - 5082    =>    192.168.0.150    Elastix SIP
From RED Uplink Main - Target RED - ANY - UDP+TCP : 4569    =>    192.168.0.150    Elastix IAX
From RED Uplink Main - Target RED - ANY - UDP+TCP : 2222 - 2238    =>    192.168.0.150    Elastix Other Ports.

SIP Proxy is disabled and didnt worked when i had configured previously.

Thanks and Waiting for help.

[salve]

http://www.voip-info.org/wiki/view/Asterisk+firewall+rules

[blueangelsbr]

Thanks for help, but i have tried it already and its is not working.

Any more ideas?

[mogyiman]

Thanks for help, but i have tried it already and its is not working.

Any more ideas?

If you have just one external IP address, You should define the rules that way :
From Uplink ANY ----> external public IP ---> Translate to ---> Internal IP : port

if You have multiple public addresses, You have to specify Source Nat rules in addition to the above.
From Asterisk box ---> Uplink ANY [ Any service ] ---> NAT to a specific external IP.

Hope this helps..
 

[mithun]

I am also having a strange problem with  Elastix behind Endian 2.3 community edition. My Elastix bx works great without any port forwarding. but i configure remote extensions which needs sip and rtp  ports to be forwarded from my ext IP to my internal Which i did.

Then started the trouble of One way audio on all Outbound calls. the other end does not hear my agent.


Please help

[mithun]

Any suggestions please..?

[jamrod]

I am also having a one way audio problem using Asterisk with EFW2.2.

Any ideas?

[razametal]

You must need to set into your sip.conf file (on elastix try with /etc/asterisk/sip_general_custom.conf ):

externip =  your.endian,external.ip ; in example: 200.100.200.100
localnet = your.local.network ; in example: 192.168.0.0/24

Save the modifications and reload asterisk.