Multiple IPSec Local/Remote Subnets

[Guest]

[trymes]

It would be nice to be able to specify multiple subnets in the GUI for a given IPSec tunnel to allow different subnets to share the same tunnel.

For example:

Site1 has GREEN=10.0.0.0/16 and BLUE=192.168.0.0/24
Site2 has GREEN=10.1.0.0/16 and BLUE=192.168.1.0/24

Currently I would have to create four tunnels in the GUI to allow all four subnets to talk to each other. However IPSec allows for the leftsubnets and rightsubnets entries to allow for multiple supbnets on either side of a tunnel, and I know our SnapGear routers allowed for specifying multiple entries.

Long story short: This would be a nice addition to the project.

Tom