|
Title: Problem with DHCP Server in Endian Firewall 2.2 Beta 1 Post by: jfontes on Tuesday 06 November 2007, 12:45:13 pm So,
Last week, I got the Endian Firewall 2.2 Beta 1 and installed it. After configure all functions that will be necessary in my firewall, tried configure the DHCP Server but it´s don´t work! My DHCP Server status is STOPPED! Anyway the checkbox DHCP GREEN INTERFACE is checked! Can someone help me, please? I´ve to do this urgent! I just try go to the shell and type: # cd /etc/rc.d/init.d # ./dhcpd start The service DHCP will be START, but, when I restart the machine, the service DHCP go to STOPPED. Please, help me! Title: Re: Problem with DHCP Server in Endian Firewall 2.2 Beta 1 Post by: FFleder on Monday 12 November 2007, 12:49:56 am Hi,
you have to check /etc/dhcpd.conf on your endian-box. The GUI fills the dhcpd config file incorrect. In my case i have to replace the netmask 24 with 255.255.255.0 Further i must enter the DHCP- Range manually. This entry from the GUI was fully incomplete (Only first Octet ) Small Config File for example you can find here: http://tldp.org/HOWTO/DHCP/x369.html#AEN382 After that you can start dhcp via direct ssh- acces on the Box: /etc/rc.d/init.d/dhcpd start have Fun FFleder Title: Re: Problem with DHCP Server in Endian Firewall 2.2 Beta 1 Post by: chrismtn on Monday 17 December 2007, 10:16:01 am Thanks FFDeder, I did this and it now works. Is there a way to start the DHCP server when it reboots? I still have to do that manually when the machine restarts.
Thanks again! Title: Re: Problem with DHCP Server in Endian Firewall 2.2 Beta 1 Post by: Bhai on Sunday 30 December 2007, 11:57:58 pm Hi,
place the lines to start dhcpd in: Quote /etc/init.d/rc.local If I'm correct it should load this after boot. Let me know if it worked. |