|
Title: problem with route to internet Post by: argie01 on Tuesday 06 December 2011, 01:42:33 am Hello,
I have a problem configuring Endian FW on my network. The problem is I can't get the internet conection works. My config is the following: Green: LAN RED: WAN --> 2 interfaces here: main and uplink1 I'm just using the uplink1 interface to test the connection, and currently "main" interface is manually disabled. I also have 2 VLANs: servers and users. And I have a main switch working as router. So, these are the static routes: Source Destination Gateway ip_server/24 ip_users/24 my switch 0.0.0.0 ip_wan_main/28 Main Uplink 0.0.0.0 ip_wan_uplink1/24 Uplink1 What it's missing here is a route to route any traffic from Uplink1 (and eventually from Main Uplink) to both VLANs. If I test just to visit a web page with an static IP and before I did a route like this: Source Destination Gateway ip_webpage ip_users/24 my switch everything works fine. But, of course, I can't do a router for every page on internet (LOL). And when I delete that route I'm not able to browse that webpage. Thank you for your help! |