Welcome, Guest. Please login or register.
Did you miss your activation email?
Monday 23 December 2024, 11:00:21 pm

Login with username, password and session length

CLICK HERE for the The official Endian Roadmap and Issue tracker
14262 Posts in 4377 Topics by 6517 Members
Latest Member: Sandro
Search:     Advanced search
+  EFW Support
|-+  Support
| |-+  General Support
| | |-+  Problem with Routing
0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Problem with Routing  (Read 11281 times)
Wihan
Jr. Member
*
Offline Offline

Posts: 3


« on: Monday 23 July 2012, 09:13:56 pm »

Hi Everyone,

I have been pulling my hair out and finally have given up, please help..

I have a EFW sitting as my default gateway, and i have a Cisco sitting on the same subnet.
The Cisco is hosting a VPN to 10.0.0.0/24, my network is 192.168.1.0/24

I have added a route from (blank) to 10.0.0.0/24 via static gateway 192.168.1.10 (cisco) and i can ping and access devices on the 10.0.0.0/24 subnet just fine

The problem is comming back in from 10.0.0.0/24 to 192.168.1.0 is not working
From the 10.0.0.0/24 network i can ping 192.168.1.10 (cisco) 192.168.1.1 (EFW), but nothing else

If i go onto a machine on the 192.168.1.0/24 network and do a "ROUTE ADD 10.0.0.0 MASK 255.255.255.0 192.168.1.10"
All communication works fine and i can see everything, telling me the problem is that the endian doesn't route properly when the connection is being initiated from the outside, but I might have just slipped up, it's been a long day.

Any help appreciated,
THanks
WIhan
Logged
Wihan
Jr. Member
*
Offline Offline

Posts: 3


« Reply #1 on: Monday 23 July 2012, 10:08:18 pm »

I have since found out that it seems i do have connectivity, it just won't ping, so there must be something in EFW blocking ICMP, however inter zone firewall and outgoing firewall have been turned off.
Logged
timupci
Full Member
***
Offline Offline

Posts: 34


« Reply #2 on: Wednesday 01 August 2012, 09:44:57 am »

you have to open the ICMP port between the 2 subnets. Remember Endian is a ROUTING FIREWALL.
Logged
Wihan
Jr. Member
*
Offline Offline

Posts: 3


« Reply #3 on: Monday 06 August 2012, 04:57:19 pm »

Hi, and thanks for your comment.

So do you mean I need to open the port in the interzone firewall, or the outgoing firewall?
I am not sure how Endian will see this as it is all considered to be in the green zone, even though it is on a different subnet.
If you can let me know where to allow the ICMP that would be great.
I have tried it in several places, which is why i resorted to turning all firewall's off, but i still can't get the response.

Cheers
Wihan
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

Page created in 0.063 seconds with 19 queries.
Powered by SMF 1.1 RC2 | SMF © 2001-2005, Lewis Media Design by 7dana.com