Endian on SSD Issues

[Guest]

[rosch]

Ill get a magnetic disk to replace ssd and see how that goes but looks like
Theres an issue with ssd and endian.
Regards peter

I tried with 2 magnetic 80Gb disks. After a  of weeks the machine was unresponsive and the HD LED was hard on, exactly the same scenario as with the SSD disks.
The 2 disks are old but SMART is not showing any reallocated errors.
All of this makes me think there is a grave bug in endian 2.4.1.
Unfortunately efw-upgrade shows no updates..

[pwinterf]

Thank you
Now i know its not just me, you have exactly the same issue.

So i wonder if our systems have anything in common, mones a jetway atom board.

I suspect we may be able to drop in another kmod for the sata controler.

Anyhow now i know its endian i can stop wasting my time replacing hardware.

Regards peter

[shcc]

This 8GB modular SanDisk SSD has been in place for 2+ years without a problem. Amazingly enough. It's the only SSD we have used out of many that has survived.
On EFW 2.4.1.

FYI

 hdparm -I /dev/sda

/dev/sda:

ATA device, with non-removable media
        Model Number:       SanDisk pSSD-S2 8GB
        Serial Number:      101337301313
        Firmware Revision:  SSD 6.00
Standards:
        Supported: 8 7 6 5
        Likely used: 8
Configuration:
        Logical         max     current
        cylinders       15525   15525
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:   15649200
        LBA    user addressable sectors:   15649200
        LBA48  user addressable sectors:   15649200
        device size with M = 1024*1024:        7641 MBytes
        device size with M = 1000*1000:        8012 MBytes (8 GB)
Capabilities:
        LBA, IORDY(may be)(cannot be disabled)
        Queue depth: 1
        Standby timer values: spec'd by Standard, no device specific minimum
        R/W multiple sector transfer: Max = 1   Current = 1
        DMA: *mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 (?)
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    NOP cmd
           *    READ BUFFER cmd
           *    WRITE BUFFER cmd
           *    Host Protected Area feature set
                Look-ahead
           *    Write cache
           *    Power Management feature set
                Security Mode feature set
           *    SMART feature set
           *    FLUSH CACHE EXT command
           *    Mandatory FLUSH CACHE command
           *    48-bit Address feature set
           *    DOWNLOAD MICROCODE cmd
           *    SMART self-test
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
        not     supported: enhanced erase
Checksum: correct