EFW Support
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
Monday 23 December 2024, 02:24:14 pm
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Visit the Official Endian Reference Manual
HERE
14262
Posts in
4377
Topics by
6517
Members
Latest Member:
Sandro
Search:
Advanced search
EFW Support
Support
General Support
Problem with Routing
0 Members and 2 Guests are viewing this topic.
« previous
next »
Pages:
[
1
]
Author
Topic: Problem with Routing (Read 11275 times)
Wihan
Jr. Member
Offline
Posts: 3
Problem with Routing
«
on:
Monday 23 July 2012, 09:13:56 pm »
Hi Everyone,
I have been pulling my hair out and finally have given up, please help..
I have a EFW sitting as my default gateway, and i have a Cisco sitting on the same subnet.
The Cisco is hosting a VPN to 10.0.0.0/24, my network is 192.168.1.0/24
I have added a route from (blank) to 10.0.0.0/24 via static gateway 192.168.1.10 (cisco) and i can ping and access devices on the 10.0.0.0/24 subnet just fine
The problem is comming back in from 10.0.0.0/24 to 192.168.1.0 is not working
From the 10.0.0.0/24 network i can ping 192.168.1.10 (cisco) 192.168.1.1 (EFW), but nothing else
If i go onto a machine on the 192.168.1.0/24 network and do a "ROUTE ADD 10.0.0.0 MASK 255.255.255.0 192.168.1.10"
All communication works fine and i can see everything, telling me the problem is that the endian doesn't route properly when the connection is being initiated from the outside, but I might have just slipped up, it's been a long day.
Any help appreciated,
THanks
WIhan
Logged
Wihan
Jr. Member
Offline
Posts: 3
Re: Problem with Routing
«
Reply #1 on:
Monday 23 July 2012, 10:08:18 pm »
I have since found out that it seems i do have connectivity, it just won't ping, so there must be something in EFW blocking ICMP, however inter zone firewall and outgoing firewall have been turned off.
Logged
timupci
Full Member
Offline
Posts: 34
Re: Problem with Routing
«
Reply #2 on:
Wednesday 01 August 2012, 09:44:57 am »
you have to open the ICMP port between the 2 subnets. Remember Endian is a ROUTING FIREWALL.
Logged
Wihan
Jr. Member
Offline
Posts: 3
Re: Problem with Routing
«
Reply #3 on:
Monday 06 August 2012, 04:57:19 pm »
Hi, and thanks for your comment.
So do you mean I need to open the port in the interzone firewall, or the outgoing firewall?
I am not sure how Endian will see this as it is all considered to be in the green zone, even though it is on a different subnet.
If you can let me know where to allow the ICMP that would be great.
I have tried it in several places, which is why i resorted to turning all firewall's off, but i still can't get the response.
Cheers
Wihan
Logged
Pages:
[
1
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Announcements
-----------------------------
=> Project News
=> Latest News and Updates
-----------------------------
Support
-----------------------------
=> General Support
=> Installation Support
=> EFW SMTP, HTTP, SIP, FTP Proxy Support
=> VPN Support
=> Hardware Support
-----------------------------
Development
-----------------------------
=> EFW Wishlist
=> Contribute Your Customisations & Modifications
Page created in 0.078 seconds with 18 queries.
Powered by SMF 1.1 RC2
|
SMF © 2001-2005, Lewis Media
Design by
7dana.com