|
Title: IPSEC Connect failed Post by: thaobn20 on Saturday 20 February 2021, 07:53:04 pm 1. Description
I've two Endian version 3.3.4. i'm using Authentication type PSK(Abc123456) (https://jira.endian.com/secure/attachment/24175/24175_screenshot_1613684396.png) Options (https://jira.endian.com/secure/attachment/24174/24174_screenshot_1613684446.png) 2. Environment 01. Endian 1: Setup with Active Directory 02. Endian 2: New setup not connect AD 3. Logs (when available / if related to the issue) Quote ipsec up SYMC initiating Main Mode IKE_SA SYMC[14] to 1x.x.x.244 generating ID_PROT request 0 [ SA V V V V V ] sending packet: from 192.168.1.9[500] to 1x.x.x.244[500] (448 bytes) received packet: from 1x.x.x.244[500] to 192.168.1.9[500] (156 bytes) parsed ID_PROT response 0 [ SA V V V V ] received XAuth vendor ID received DPD vendor ID received Cisco Unity vendor ID received NAT-T (RFC 3947) vendor ID generating ID_PROT request 0 [ KE No NAT-D NAT-D ] sending packet: from 192.168.1.9[500] to 1x.x.x.244[500] (308 bytes) received packet: from 1x.x.x.244[500] to 192.168.1.9[500] (308 bytes) parsed ID_PROT response 0 [ KE No NAT-D NAT-D ] local host is behind NAT, sending keep alives remote host is behind NAT generating ID_PROT request 0 [ ID HASH N(INITIAL_CONTACT) ] sending packet: from 192.168.1.9[4500] to 1x.x.x.244[4500] (108 bytes) received packet: from 1x.x.x.244[4500] to 192.168.1.9[4500] (92 bytes) parsed INFORMATIONAL_V1 request 369591745 [ HASH N(AUTH_FAILED) ] received AUTHENTICATION_FAILED error notify establishing connection 'SYMC' failed ERROR parsed INFORMATIONAL_V1 request 369591745 [ HASH N(AUTH_FAILED) ] received AUTHENTICATION_FAILED error notify Can you help me? Thank so much |