|
Title: Multi-Site routing issue Post by: ybjones72 on Wednesday 06 June 2012, 11:29:06 pm I have just set up Endian Communitu 2.5.1 but I am having difficulty getting the routing to work correctly between multiple sites. I have attached a document with the network details and what I have set up so far.
I can ping from 10.1.0.0/16 to 10.2.0.0/16, 10.3.0.0/16, and 10.4.0.0/16 with no problems only after creating the firewall rules shown in the attachment. I can get Internet access from all subnets. Subnet 10.1.0.0/16 never had an issue. The other three had no Internet access until creating the rules in the attachment. I can only ping 10.1.1.2 (Endian box) or 10.1.1.3 (Cisco interface) from any of the 3 satellite subnets. I cannot ping anything else on the 10.1.0.0/16 network from any of the other 3 subnets. My VPN users can only ping the 10.1.0.0/16 subnet. The other 3 networks are pushed in the VPN config but still not able to ping. I am scratching my here and I would appreciate any suggestons. Thanks, Yancey Title: Re: Multi-Site routing issue Post by: ybjones72 on Thursday 07 June 2012, 12:24:12 am Well, I decided to let the CISCO handle routing and made it the default gateway for all subnets. Now everything works just fine.
|