changing NIC

[Guest]

[ollenotna]

I had to transfer my disk with endian 2.5.1 on a new computer, then with new network cards.

Now, clearly the network cards (only red and green) were eth2 and eth3.

I then edited /etc/businfotab changing eth2-eth3 to eth0-eth1.

On restart with ifconfig I see that eth1 is properly configured with the IP address of the external network (red), while the eth0 is not configured.

Yet in /var/efw/ethernet/settings I see:

GREEN_ADDRESS = 192.168.0.2
GREEN_BROADCAST = 192.168.0.255
GREEN_IPS = 192.168.0.2 / 24
GREEN_NETADDRESS = 192.168.0.0

there is also
GREEN_DEV = br0

and in /var/efw/ethernet/br0 I see:

eth0

In short, eth0 should be configured.

I try  netwizard but I get an invalid command mssage (I assume it is for  3.0 endian)
and I do not know how to change the card's via console, as I can not use the web interface.

what shall I do?

other option:
reinstall from scratch upgrading to endian 3
but how to save the configurations of the existing proxy and transfer them to the new installation, all from the console?

TIA
Antonello