|
Title: Port Forwarding problem w/EFW 2.3 and 2.4.1 Post by: diego1989 on Saturday 14 May 2011, 08:12:01 am I have a lot of firewalls working in production in some enterprises with the same problem.
When I add rules into "NAT/Port Forwarding" tab, some ports redirected seem open and works, but others don't, specially the web ports (80, 443, 8080), but the system access rule for the 10443 port runs good. I have read an article that speaks about two possible solutions to this problem (kb.endian.com/entry/15/), but it hasn't fix the efw problem. The rule from a one of EFWs that I manage: # Target Service Policy Translate to Remark Actions 1 Uplink ANY TCP/80 ALLOW 192.168.50.5 DVR Access from: Uplink ANY In that LAN, the host 192.168.50.5 has port 80 open and a daemon listens that port, locally it's possible to enter with a web browser to http: //192.168.50.5. Excuse my bad English, i'm not a native English writer. Title: Re: Port Forwarding problem w/EFW 2.3 and 2.4.1 Post by: diego1989 on Tuesday 24 May 2011, 02:06:05 am I'll answer my own question... the trouble happens when I try to do DNAT from any EFW box, to a VM over XEN.
The XEN and the destintation Virtual Machine is the problem. I hope that post has helped someone! Consider this issue as closed.- |