EFW Support

Support => General Support => Topic started by: 3ncode on Saturday 03 September 2011, 11:00:41 pm

Title: SMB Port Forwarding
Post by: 3ncode on Saturday 03 September 2011, 11:00:41 pm

Hello All

I've set Endian up on a VM using the setup seen here:

h**p://i55.tinypic.com/24wzofk.jpg

Everything is working great, the only issue is that I can't seem to get SMB port forwarding working! Everything else I've setup has worked without a hitch but no matter what I try and can't get file sharing to work through the firewall. I currently have the following port forwarding setup:

Code:

UDP:137/138/139/445
TCP:139/445

Uplink Main -> 10.0.0.100 ALLOW

Any thoughts?

Thanks!

Title: Re: SMB Port Forwarding
Post by: fqureshi on Saturday 03 September 2011, 11:07:37 pm

Try to disable NAT for these rules and try again...NAT changes the ports as traffic passes through it and other side would no t understand natted ports...this happend with me with the application i was running but nt SMB as there is no need of itunder my network scenario...

Also before that try to telnet from console on to these ports and check if your able to telnet....

Title: Re: SMB Port Forwarding
Post by: 3ncode on Sunday 04 September 2011, 12:24:07 am

Disabling NAT for the rules didn't change anything. :(

-edit-

Sad times. Windows firewall had re-enabled itself when I added the loopback network card, it was stopping the SMB traffic :(! All is working as expect now it is disabled.

Title: Re: SMB Port Forwarding
Post by: fqureshi on Sunday 04 September 2011, 08:03:08 am

Cool :-)