|
Title: Can't access EFW web console Post by: fatale80 on Friday 21 June 2013, 11:38:23 pm Hi,
I've recently installed EFW 2.5 in our office and started to play with it. I could access web interface and configure the whole thing via web browser. Unfortunatelly, I have played with firewall rules because local loop didn't work and somehow i disallowed access from my PC to the EFW web console. My question is: How can i revert this firewall rule actions back and restore the normal operation of the EFW? I have very little Linux experience so i don't know how to modify IPTables through normal console. Would there be any good How-To tutorial or any good soul that will help me to tackle down this issue please? The EFW is stand alone old PC with three network cards (RED - Internet, GREEN - Local network (10.0.0.x), BLUE - Wifi (192.168.1.x) ) Thank you for all usable comments Cheers! Milano Title: Re: Can't access EFW web console Post by: juddyjacob on Thursday 29 August 2013, 05:35:21 pm really hard to say without knowing what you changed. first thing first, try to ping it and make sure you get a responce. id also setup a monitor and keyboard on it, your probally gonna need them. make sure you are in the correct interface - green. Or the proxy is enabled but doesnt start. The default system access rules dont allow you to lock yourself out.
Title: Re: Can't access EFW web console Post by: juddyjacob on Thursday 29 August 2013, 05:46:04 pm you may have also blocked access from port 80 with the proxy off
try to access - https://10.0.0.x:10443 |