EFW Support
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
Saturday 21 September 2024, 09:52:09 pm
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Visit the Official Endian Reference Manual
HERE
14247
Posts in
4376
Topics by
6510
Members
Latest Member:
Luigi Di Mattia
Search:
Advanced search
EFW Support
Support
General Support
setting priority on RTP traffic - UDP 10000 - 20000
0 Members and 1 Guest are viewing this topic.
« previous
next »
Pages:
[
1
]
Author
Topic: setting priority on RTP traffic - UDP 10000 - 20000 (Read 10568 times)
gopher_49
Full Member
Offline
Posts: 19
setting priority on RTP traffic - UDP 10000 - 20000
«
on:
Sunday 19 May 2013, 03:06:36 am »
My goal is to set priority on RTP traffic for the few SIP phones I have on my LAN. These phones register to a remote SIP server. The ports I need priority on is UDP ports 10000 - 20000. I've read the help guides and browsed through the forum and this is the config I came up with… My source is configured as my UPLINK. The destination is the SIP server's IP I'm registering to with my phones. The protocols set are tcp+udp and the service is set for 0:65535. I have minimize/delay enabled for the TOS/DSCP. The traffic class is IPSEC - High Priority. Is this correct? Will this set priority on UDP 10000 - 20000 ??
Logged
Syntax42
Full Member
Offline
Posts: 19
Re: setting priority on RTP traffic - UDP 10000 - 20000
«
Reply #1 on:
Monday 20 May 2013, 11:50:10 pm »
I'm not sure if you got it right, but it sounds like you were close, at least.
Endian 2.5.1 seems kind of buggy in the QoS web interface. If you edit the device, it changes the uplink name to IPSEC (a VPN protocol) instead of your primary uplink. I would suggest deleting everything in QoS devices and classes, and starting over without making mistakes on the devices.
After you have re-added your uplink, set the classes. I would not reserve more than 10% for any single class unless your bandwidth is low. For the high-priority class, reserve 100-200 kb/s per outgoing line included in your VOIP service.
In the rules, the protocol can be UDP and the ports 10000:20000. Source should be green AND red because we want traffic coming in to have priority too. The TOS/DSCP value you set the firewall to look for is determined by your IP phone manufacturer. For my Polycom phones, they use a DSCP value of EF (hex). Destination device should be Uplink Main and the network can be empty.
That's how I have mine set up. It seems to work.
Logged
gopher_49
Full Member
Offline
Posts: 19
Re: setting priority on RTP traffic - UDP 10000 - 20000
«
Reply #2 on:
Wednesday 05 June 2013, 08:58:11 am »
Thanks for the information. When I get to my lab I'll give it a shot.
thanks!
Logged
Pages:
[
1
]
« previous
next »
Jump to:
Please select a destination:
-----------------------------
Announcements
-----------------------------
=> Project News
=> Latest News and Updates
-----------------------------
Support
-----------------------------
=> General Support
=> Installation Support
=> EFW SMTP, HTTP, SIP, FTP Proxy Support
=> VPN Support
=> Hardware Support
-----------------------------
Development
-----------------------------
=> EFW Wishlist
=> Contribute Your Customisations & Modifications
Page created in 0.047 seconds with 19 queries.
Powered by SMF 1.1 RC2
|
SMF © 2001-2005, Lewis Media
Design by
7dana.com