Multi-Site routing issue

[Guest]

[ybjones72]

I have just set up Endian Communitu 2.5.1 but I am having difficulty getting the routing to work correctly between multiple sites. I have attached a document with the network details and what I have set up so far.

I can ping from 10.1.0.0/16 to 10.2.0.0/16, 10.3.0.0/16, and 10.4.0.0/16 with no problems only after creating the firewall rules shown in the attachment.

I can get Internet access from all subnets. Subnet 10.1.0.0/16 never had an issue. The other three had no Internet access until creating the rules in the attachment.

I can only ping 10.1.1.2 (Endian box) or 10.1.1.3 (Cisco interface) from any of the 3 satellite subnets. I cannot ping anything else on the 10.1.0.0/16 network from any of the other 3 subnets.

My VPN users can only ping the 10.1.0.0/16 subnet. The other 3 networks are pushed in the VPN config but still not able to ping.

I am scratching my  here and I would appreciate any suggestons.

Thanks,
Yancey

[ybjones72]

Well, I decided to let the CISCO handle routing and made it the default gateway for all subnets. Now everything works just fine.