|
Title: Install EFW 3.0 in HP proliant 310 G8 Post by: hadexx on Thursday 06 February 2014, 05:24:55 am hi
i have a problem, i have a EFW in a HP computer but i need migrate a server ML310 G8, the install process end normaly, but the network donīt work, if try a Ping to any IP adresses say : host unreachable to .... this is the LSPCI to the machine 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 00:06.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation C204 Chipset Family LPC Controller (rev 05) 00:1f.2 RAID bus controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA RAID Controller (rev 05) 01:00.0 System peripheral: Hewlett-Packard Company Integrated Lights-Out Standard Slave Instrumentation & System Support (rev 05) 01:00.1 VGA compatible controller: Matrox Electronics Systems Ltd. MGA G200EH 01:00.2 System peripheral: Hewlett-Packard Company Integrated Lights-Out Standard Management Processor Support and Messaging (rev 05) 01:00.4 USB controller: Hewlett-Packard Company Integrated Lights-Out Standard Virtual USB Controller (rev 02) 02:00.0 Memory controller: Hewlett-Packard Company Device 005f 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5717 Gigabit Ethernet PCIe (rev 10) 03:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5717 Gigabit Ethernet PCIe (rev 10) and that is le ifconfg -a br0 Link encap:Ethernet HWaddr B6:9D:B4:3C:62:44 inet addr:192.168.0.15 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::b49d:b4ff:fe3c:6244/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:468 (468.0 b) br1 Link encap:Ethernet HWaddr 86:DF:35:F6:E2:F8 inet6 addr: fe80::84df:35ff:fef6:e2f8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:468 (468.0 b) br2 Link encap:Ethernet HWaddr 06:F3:25:46:B2:4D inet6 addr: fe80::4f3:25ff:fe46:b24d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:468 (468.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) i install the RPM to the driver smart config -set rpm-check-signatures=false and smart install /mnt/usbstrick/drivers/kmod-tg3-3.132f-1.rhel5u8.x86_64.rpm and all the RPM to the HP WEB SUPPORT ANY idea ??? |