|
Title: Endian 3.0 community IPSEC service STOPPED Post by: RDequal on Thursday 18 December 2014, 07:08:27 am I switched on IPSEC vpn, configured a connection, but it doesn't work.
IPSEC, in Status -> services, is always STOPPED. Any suggestion? Thanx R. Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: mmiat on Monday 22 December 2014, 09:29:43 pm did you activate it? :)
I made same error first time, you have to configure connection AND to activate service Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: enterat on Friday 16 January 2015, 05:23:30 pm Hi
I'm having the same problem, even with the link enabled the services page still reports stopped and the link is constantly connecting. Did you have any joy with yours? Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: phqr58 on Tuesday 20 January 2015, 03:33:31 pm the user SerFingolfin published the solution and it works great.
Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: enterat on Tuesday 20 January 2015, 04:23:11 pm the user SerFingolfin published the solution and it works great. Do you have a link to the solution as I can't find anything by SerFingolfin in a search Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: phqr58 on Saturday 24 January 2015, 05:08:51 pm hello
http://share.endian.com/luca/public/efw-ipsec-3.0.52-1.endian9.noarch.rpm http://share.endian.com/luca/public/jobsengine-3.0.26-1.endian5.i586.rpm Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: ayaari on Sunday 25 January 2015, 03:03:58 am Hi all
after updating: efw-ipsec-3.0.52-1.endian9.noarch.rpm jobsengine-3.0.26-1.endian5.i586.rpm ipsec connection couldn't establish. any idea? Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: phqr58 on Tuesday 27 January 2015, 04:12:07 pm Write to phqr58@gmail.com
Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: phqr58 on Wednesday 28 January 2015, 05:31:37 am 1) download
http://share.endian.com/luca/public/efw-ipsec-3.0.52-1.endian9.noarch.rpm http://share.endian.com/luca/public/jobsengine-3.0.26-1.endian5.i586.rpm 2) Update packages ENDIAN 3.0, is not necessary in ENDIAN 2.5.2 or earlier rpm -U http://share.endian.com/luca/public/efw-ipsec-3.0.52-1.endian9.noarch.rpm rpm -U http://share.endian.com/luca/public/jobsengine-3.0.26-1.endian5.i586.rpm 3) After upgrading reboot Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: X-Dimension on Wednesday 25 February 2015, 11:28:24 pm I've updated our Endian 3.0 Community with these packages, but it still don't work.
Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: X-Dimension on Friday 27 February 2015, 01:06:05 am OK, IPsec is now working fine, after changing some firewall rules, but the VPN service is still shown as "stopped" on the status page.
Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: fcastillop on Friday 29 January 2016, 07:06:45 am Hello, newbie here.
Reading this post, I found out that is my same problem with my EFW 3.0, I have accomplished the conection in the VPN/IPSEC section, but I can't access to the other side of the conexion. I've configure an ipsec net to net conection. I think that the part I'm missing is the Firewall rules, would X-Dimension post the rules he configure or at least explain how he did it. The only thing I did, was openning the ports 500, 4500 and 50 on the incoming section of the Firewall. I can't find anywhere how to configure the firewall to allow this trafic. Another issue I have detected is that in the status section, I see the VPN (ipsec) as stopped, but if I run in the shell #ipsec status it shows me that the conection is up. I'll appreciate any help you can give me. Thank you Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: chatthasong on Saturday 30 January 2016, 11:55:24 am Hello, newbie here. Reading this post, I found out that is my same problem with my EFW 3.0, I have accomplished the conection in the VPN/IPSEC section, but I can't access to the other side of the conexion. I've configure an ipsec net to net conection. I think that the part I'm missing is the Firewall rules, would X-Dimension post the rules he configure or at least explain how he did it. The only thing I did, was openning the ports 500, 4500 and 50 on the incoming section of the Firewall. I can't find anywhere how to configure the firewall to allow this trafic. Another issue I have detected is that in the status section, I see the VPN (ipsec) as stopped, but if I run in the shell #ipsec status it shows me that the conection is up. I'll appreciate any help you can give me. Thank you How method to connect VPN IPsec? etc. Static IP,DDns Title: Re: Endian 3.0 community IPSEC service STOPPED Post by: mmiat on Thursday 05 January 2017, 07:42:31 pm similar problem here: http://www.efwsupport.com/index.php/topic,4091.0.html
|