|
Title: Problem - VPN does not access the internal network sites Post by: allanlinux on Thursday 24 July 2014, 05:46:17 am Hey Guys!
I am new to endian and I'm in trouble! I have a Windows (20 windows servers) and network with Endian firewall / vpn / proxy, everything works smoothly. Created a vpn to the company director, it connects but does not open the internal sites <//intranet - //erp/> need him to open the vpn internal sites. My Windows server running AD / DNS / DHCP and Endian Firewall / VPN / PROXY Follows the settings Endian version 2.5.1 Community Endian networks - GREEN = 192.168.1.2/24 --------------------------------------------------------------------- OpenVPN COnfiguration ------------------------------------------------------------------------ OPENVPN - NOT bridged - VPN Subnet = 10.2.2.0/24 OpenVPN Account Setup - Direct all clients through server - [not checked] - push only global options to this client [checked] Networks behind client: [10.2.2.2/24] push nameserver and domain - [both not checked] OpenVPN advanced settings - 1194 / UDP - Block DHCP - [NOT CHECKED] - dont block traffic - [checked] - allow multiple - [not checked] Global push options: - push these networks - enabled - [0.0.0.0/1 & 128.0.0.0/1] - push nameserver - enabled - [192.168.1.1] (This is the address of my Windows server with DNS) - push domain - enabled - [antlia.local] ----------------------------------------------------------------------------------- VPN Firewall Configuration -------------------------------------------------------------------------------------- Enable VPN Firewall source = vpn (OpenVPN user) - User created destination = RED, GREEN, Openvpn Server Service = <ANY> Policy = Allow w/ IPS enabled = checked -------------------------------------------------------------------------------- Again, with this setup I can connect to the network but do not have access to network drivers, I can not open internal pages and not access the printers. does not access the address of endian <//192.168.1.2:10443>. --------------------------------------------------------------------------------- OpenVPN client Config -------------------------------------------------------------------------------- client float dev tap proto udp remote MY_NETWORK_IP_STATIC 1194 resolv-retry infinite persist-key persist-tun ca firewall.pem auth-user-pass pull comp-lzo verb 3 Please, help me! |