EFW Support

Support => General Support => Topic started by: Shinare on Thursday 23 July 2015, 06:05:36 am



Title: Routing Between Subnets on GREEN?
Post by: Shinare on Thursday 23 July 2015, 06:05:36 am
Hi, I have three subnets on a single LAN that I would like to be full routing between (as if they were on the same subnet).  They are:
10.10.10.0/24
10.10.1.0/27
10.10.1.32/27

I have added an interface IP for the green (eth0) of:
10.10.10.1/24
10.10.1.1/27
10.10.1.33/27

I tried adding a static route:
Source:<ANY>
Destination: 10.10.1.0/27
Static Gateway: 10.10.10.1

The Domain Controller is on 10.10.10.0 and workstations on the other two subnets.  How to I enable communication between the subnets? ???

Can ping from 10.10.1.5 to 10.10.10.2 but can not ping from 10.10.10.2 to 10.10.1.5


Title: Re: Routing Between Subnets on GREEN?
Post by: Shinare on Thursday 23 July 2015, 06:15:37 am
Some additional information:

Server (TestDC) NIC set to:
IP:10.10.10.2
Mask:255.255.255.0
GW:10.10.10.1
DNS:10.10.10.2

Workstation (TestW) NIC set to:
IP:10.10.1.5
Mask:255.255.255.224
GW:10.10.1.1
DNS:10.10.10.2

Browsing internet works for 10.10.1.0 but can not "see" domain controller on 10.10.10.2 to join domain, but it can ping the 10.10.10.2 IP.