static / policy routing

[Guest]

[mvrk]

Hi,

I've got two uplinks (Main and Backup).

I need the traffic to a certain destination IP goes always through the backup uplink even if the active one is the Main uplink.

I've tried to add a rule in static routing, but it doesn't work, keeps going through the default gateway

[b1naryg0d]

if you need to go threw console and the 2nd uplink is a different interface then this should work
/sbin/route add -host <destination IP> dev <Backup Uplink Interface>
should be able to do it through the gui too but i havent done it that way before

[mvrk]

Ok, it works manually and also on the web interface.

My problem was that my second uplink wasn't really working