EFW Support

Support => General Support => Topic started by: christophel77 on Monday 09 November 2015, 08:11:01 pm



Title: Endian Bridged Mode OVH/SOYOURSTART
Post by: christophel77 on Monday 09 November 2015, 08:11:01 pm
Dear,

I have one server on OVH group. I have install Vmware 5 and update it to 6.0
So now i install Endian Firewall. But i must change network configuration

on debian 8, I have tested this configuration .

auto lo eth0
iface lo inet loopback
iface eth0 inet static
address IP.FAIL.OVER
netmask 255.255.255.255
broadcast IP.FAIL.OVER
post-up route add GATEWAY_VM dev eth0
post-up route add default gw GATEWAY_VM
pre-down route del GATEWAY_VM dev eth0
pre-down route del default gw GATEWAY_VM

(GATEWAY_VM is my public IP of VMWARE, IP.FAIL.OVER is another public IP (that I  to OVH)

This configuration run correctly ( See on web help.ovh.co.uk/bridgeclient)


But how i can configure on terminal server post-up and pre-down command on /etc/network/interfaces ?

Best Regard



Title: RESOLVED : Endian Bridged Mode OVH/SOYOURSTART
Post by: christophel77 on Tuesday 10 November 2015, 08:23:02 pm
I have resolved this problem

For information :

1. put information on your file /etc/network/interfaces  like debian  (delete netd_v4 information)
2. On your soyourstart web interface , match on virtual mac on your public IP
3. On your vsphere client , your must add manual mac adress for you VM (put Virtual MAC)
and it's running