Late response, but the HP NC365T NIC is
not supported by default, at least not at version 3.0.
The good news is that there is a resolution to get it working. In order to assist anyone who may run into this issue in future, the following is taken and adapted from h**p://jira.endian.com/browse/CORE-629 (you will need to register on their site in order to access):
1. Download the following (replace * with t): h**p://jira.endian.com/secure/attachment/16320/new-intel-drivers-3.0.tar.gz
2. Extract the zip file. Copy that folder to endian root folder.
3. smart install kernel-PAE-2.6.32.43-57.e51.i686.rpm
Eg:
root@efw-1429087346:~/new-intel-drivers-3.0 # smart install kernel-PAE-2.6.32.43 -57.e51.i686.rpm
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
kernel-PAE-3:2.6.32.43-57.e51@i686
Removing packages (4):
efw-community-3.0.1-1.endian26@i586
kernel-3:2.6.32.43-57.e51@i586
kernel-module-megaraid-sas-06.806.08.00-0.endian1_2.6.32.43_57.e51@i586
megaraid-sas-06.806.08.00-0.endian1_2.6.32.43_57.e51@i586
12.4MB of package files are needed. 89.5kB will be used.
Confirm changes? (Y/n): y
Committing transaction...
Preparing... ######################################## [ 0%]
1:Removing kernel-module-m.. ######################################## [ 20%]
2:Removing efw-community ######################################## [ 40%]
grubby fatal error: unable to find a suitable template
grubby: doing this would leave no kernel entries. Not writing out new config.
3:Removing kernel ######################################## [ 60%]
4:Removing megaraid-sas ######################################## [ 80%]
5:Installing kernel-PAE ######################################## [100%]
Output from kernel-PAE-3:2.6.32.43-57.e51@i686:
rootdev=/dev/root
rootdev=/dev/root
4. smart install kernel-module-igb-PAE-5.0.6-2.endian4_2.6.32.43_57.e51.i586.rpm
Eg:
root@efw-1429087346:~/new-intel-drivers-3.0 # smart install kernel-module-igb-PA E-5.0.6-2.endian4_2.6.32.43_57.e51.i586.rpm
Loading cache...
Updating cache... ######################################## [100%]
Computing transaction...
Installing packages (1):
kernel-module-igb-PAE-5.0.6-2.endian4_2.6.32.43_57.e51@i586
84.0kB of package files are needed. 190.1kB will be used.
Confirm changes? (Y/n): y
Committing transaction...
Preparing... ######################################## [ 0%]
1:Installing kernel-module.. ######################################## [100%]
Saving cache...
5. Reboot the endian firewall.
The above was provided by the friendly folk on Endian's JIRA system. I take no for this fix, but I can confirm that implementing it had no negative impact on our system at all, and resulted in the HP NC365T NIC being picked up correctly and functioning as intended.
If you do run into this issue and the instructions above worked for you, please consider posting a thank you note over on h**p://jira.endian.com/browse/CORE-629 to the people who packaged the files and created the instructions
Author