Can no longer access Endian...?!

[Guest]

[Vinbob]

Hello All,

I have just gone through the initial configuration of my Endian Firewall and having applied the changes, the system did not come back with the main menu and I am now unable to access via its IP. I have chosen the default 192.168.0.15/24 IP but am wondering if I should have chosen a different IP for my Green network. I have also configured other interfaces as follows:

Green - 192.168.0.15 (eth3)
Blue - 10.0.0.1 (eth0)
Orange - 192.168.10.1 (eth2)
Red - DHCP from Cable Modem (eth1)

I have not plugged anything into the RED interface yet and basically have a cable going from the eth3 (green) adapter to a ethernet switch which is connected to my cable modem. Things were working just fine on my private 192.168.0.x network. Do I need to start plugging the cables into the Endian appliance to make things work? Should I have chosen a different IP for the Green network?

Sorry if I sound a little lost here but networking is not my specialty and would appreciate any help on moving forward with this.

Cheers,
Vin.

[gyp_the_cat]

Hi Vin,

Can you ping 192.168.0.15 from your internal network?

[Vinbob]

No, I cannot. I used to be able to but once I went through the configuration wizard and setup all the interfaces, something has been setup incorrectly to now make the Firewall unreachable.

Anyone any ideas...?! :-/

Cheers,
Vin.

[Vinbob]

Doh!!!! - I just figured the issue out. After I went through the initial Wizard configuration, the Green network got switched over to a different NIC. I figured I would plug the network cable and try all the other interfaces and sure enough, it worked when I plugged into a different card.

Problem solved! 

Cheers,
Vin.

[gyp_the_cat]

Glad to hear it Vin