2.4 & DL 360 Server

[Guest]

[ccline19]

2.4 & DL 360
Has anyone come up with a solution for DL 360 that uses /dev/ida/c0d0 ?

I got the "unable to partition error" when tring to install. Looking at the logs it appears it created the 3 partitions...

/dev/ida/c0d0p1
/dev/ida/c0d0p2
/dev/ida/c0d0p3
/dev/ida/c0d0p4 - Empty

Successfully wrote the new partition table

Re-reading the partition table...
Running Command: modprobe dm-mod
Running Command: /bin/pvcreate --force --force --yes -- zero y /dev/ida/c0d03
file descriptor 3 left open
file descriptor 4 left open
file descriptor 5 left open
file descriptor 6 left open
file descriptor 7 left open
 Device /dev/ida/c0d03 not found

any ideas?

[ccline19]

Does anyone have any ideas how I can fix this problem? I have tried installing Smoothwall on the same machine and I get the same type of error. I have also tried IPCop and it installs fine. I'd rather use endian but if I can't get it installed I will have to go the IPcop route

[ccline19]

Well, my desire to go with Endian has gotten the best of me, so I switch to a different computer to run endian. It has a raid 1 setup as well but endian installed just fine on it. the only difference is the other system is using sata drives in stead of scsi.