IP Configuration Broadcast Not Populated (OVH Failover IP)

[Guest]

[ollietrex]

Hi

I am trying to configure endian firewall to work with an OVH failover IP but I keep running into issues with the broadcast address not being populated.

The address should be:

Link encap: Ethernet  HWaddr 02:00:00:12:56:98
          inet addr:86.21.189.15  Bcast:86.21.189.15  Mask:255.255.255.255

But comes out as:

Link encap: Ethernet  HWaddr 02:00:00:12:56:98
          inet addr:86.21.189.15  Bcast:0.0.0.0  Mask:255.255.255.255

I have played with the configuration /var/efw/uplinks/main/settings with the following configuration:

DEFAULT_GATEWAY=149.202.82.254
RED_ADDRESS=86.21.189.15
RED_CIDR=32
RED_BROADCAST=86.21.189.15
RED_DEV=eth0
RED_IPS=86.21.189.15/32
RED_NETMASK=255.255.255.255
RED_TYPE=STATIC

It seems that if the RED_CIDR is set as 32 it sets the broadcast as 0.0.0.0 but based on the guide guide.ovh.com/BridgeClient it needs to be /32

Any ideas how I can configure this in endian?

Thanks for any help.