EFW Support

Support => General Support => Topic started by: jr3151006 on Saturday 09 March 2013, 12:39:39 am



Title: Internal pc's cannot access webserver behind EFC v2.5.1 - SOLVED!
Post by: jr3151006 on Saturday 09 March 2013, 12:39:39 am
Hi,

external users can access fine the webserver hosted behind Endian; but internal users not.
The firewall redirection rule already is 'able'/set up to receive packets from 'MAIN LINK' and 'GREEN LINK' also but is not working.

>>>> Should I create another rule/policy?

Both server and workstations are on the same subnet (192.168.0.x/24). To accomplish the access for internal users, I´m modifying the C:\WINDOWS\SYSTEM32\DRIVERS\ETC\HOST file, but for each new user/visitor using our connection that is a dilema.


Title: Re: Internal pc's cannot access webserver behind EFC v2.5.1
Post by: Danoh on Saturday 09 March 2013, 12:54:24 am
So a host on GREEN can't access the webserver on RED using the RED ip address?

If that's the case, you need a little NAT "loopback"

Add a source NAT rule:
Source Network/IP: 192.168.0.0/24
Destination Zone/VPN/Uplink: GREEN + Interface X (Zone: GREEN)
Service/Port: Any/Any
NAT: NAT
To Source address: Uplink Main - Auto


Title: Re: Internal pc's cannot access webserver behind EFC v2.5.1
Post by: jr3151006 on Saturday 09 March 2013, 01:00:21 am
Hi Dano,

I found some advice and worked fine. The "secret" is create a NAT rule able to receive that packet/connection from RED and GREEN and also create a 'Source NAT' to enable/allow the internal network come back to 'GREEN'.


http : // www . efwsupport . com / index . php ? action=dlattach;topic=2945.0;attach=363;image
http : // www . efwsupport . com / index . php ? action=dlattach;topic=2945.0;attach=365;image

* Full toppic: http : // www . efwsupport . com / index . php?topic=2945.0