|
Title: endian 2.5 bandwidth limitation / QoS Post by: mangthjik on Sunday 04 March 2012, 10:42:42 pm hello there....
Any one here has implement bandwidth limitation / QoS successfully ? I am trying to limit port 80 and 1955 but no hope. the rule still unwork . I just want to know . Thanks A lot Title: Re: endian 2.5 bandwidth limitation / QoS Post by: AussieBloke on Monday 12 March 2012, 03:31:11 pm QoS is complex to setup. Basically to get QoS to work correctly you have to have all your network using QoS. Your clients, switches, and other network network devices must use QoS. QoS has its own problems and unless you really nead QoS you are better of not implementing it.
Title: Re: endian 2.5 bandwidth limitation / QoS Post by: mangthjik on Tuesday 13 March 2012, 06:09:10 pm actually I just want to limit https and streaming ( port 443 and 1955) make it as a bulk trafic so the main line is clear.for now I am using Another red line to route and make it sparate from main red link , and I thinks its not worth . and want to use Qos just want to limit its
Title: Re: endian 2.5 bandwidth limitation / QoS Post by: mic on Wednesday 14 March 2012, 04:14:09 am Mangthjik , i have the same problem , Device you can configure , but there is a problem with Classes or Rules
In endian 2.4.1 the same configuration is working . Title: Re: endian 2.5 bandwidth limitation / QoS Post by: cyclops on Sunday 06 May 2012, 11:52:29 pm hi all,
I am too facing the same problem, the QOS does not work on the endian firewall. Please help provide me the right steps to configure the same. ENDIAN 2.5.1 (Comunity edition) SET A Users 25 users (192.168.0.5 - 192.168.0.30) internet speed should be 512 kbps SET B Users 5 users (192.168.0.40 -192.168.0.45) internet speed unlimited. I had read some forums people getting error most browsers while creating the rules in QOS except firefox. Also the class total should be 100% ( i am not sure if creating classes with fixed kbps seconds what to do) I am new to endian and firewall setup. (reserverd vs limit in QOS classes) Please help thank you. Title: Re: endian 2.5 bandwidth limitation / QoS Post by: lokutus25 on Friday 26 October 2012, 08:42:56 pm Is there a confirmed problem about QoS in 2.5.1? I can't find info about this...nor I can make QoS works.
Maybe I'm doing something wrong. Do you know of some Wiki/Howto on the subject? The official documentation is quite...insufficient :D Thanks! Title: Re: endian 2.5 bandwidth limitation / QoS Post by: rnovasconi on Wednesday 04 September 2013, 01:32:38 am I also encountered similar experiences in EFW 2.5.1.
I also found the bug ID 0002675 , reported for EFW 2.3, but I cannot understand if it is solved in following releases or not. By the other hand I'd like to find a sample working configuration for QOS by the support team. |